| Search | Login/Register
   Home » Melquiades Amplifier » To Milq builders: corrections, simplification, modifications. (17 posts, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (17 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Super Melquiades Amplifier...  About the Super Melquiades Bass....  Melquiades Amplifier  Forum     29  268781  07-16-2005
  »  New  Building Melquiades: Chronicle of full-range..  VR2 issue leading to jump in current on 6C33 tube...  Melquiades Amplifier  Forum     44  411971  06-09-2006
  »  New  “Melquiades” amplifier: a year later...  Considerations about Melquiades’ layout....  Melquiades Amplifier  Forum     33  318676  10-05-2006
  »  New  The one-stage Melquiades...  It's time, what amorphous opt...  Melquiades Amplifier  Forum     74  654904  04-21-2007
  »  New  Has anyone built the DIY Melquiades amp??..  You did not reply what music you are listening….....  Melquiades Amplifier  Forum     2  35641  08-24-2007
  »  New  The Melquiades' "Remote Biasing"..  The Melquiades' "Remote Biasing"...  Melquiades Amplifier  Forum     0  22252  02-05-2008
05-17-2007 Post mapped to one branch of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 1
Post ID: 4423
Reply to: 4423
To Milq builders: corrections, simplification, modifications.

Since I know about a few ongoing attempts out there by different people to build Melquiades I would like to share with some of my observations regarding corrections, simplification and possible modifications of Melquiades amplifier.

Obviously you have read the Melquiades release page:

http://www.goodsoundclub.com/Melquiades.aspx

Please take very seriously my insistence for high sensitively speakers. It was not the paranoia or preferences of a horn guy. There are deep underlying reasons (that I live aside) why I insist to use high sensitively speakers.

Below are a set of randomly organized thoughts about Melquiades that the people who have considered devote/invest into Melquiades might find useful. All below comments will be regarding a regular full-range Milq, not about the Milq DSET.

1) Melquiades, Milq, Melq – across this site they are the same names of the Melquiades SET

2) The Milq’s Driver state tube is easily available on eBay for slightly more then one dollar. It is ridiculously wonderful as the Morons pay a lot of money for 6H30, 437A, “kinky” 6922, and many other drivers but they completely disregard the dirt-cheap 6E5P that in fact sound order of magnitude more interesting then any other indirect heated drivers.

3) There is a mistake in Milq circuit. The B+ of the driver stage has almost insufficient amount of critical inductance. It was because I drew the circuit having the Super Milq in my head where the PS was feeding 3 stages and consequently drew more current. I recently opened my full range Mils and confirmed that I have not 15H coke in there but 30H. So, ether you increase the current you draw across the PS lowering the R23 bleeder or increase the value of the L1 choke (Hammond has 30H and 40H chokes that do very nice). My presumption is that any PS with input choke should be tested in continuity, so it is easy to see what is going on….

4) It is not necessary to run input choke filtration for the Milq’s bias supplies. If you wish to do for CRC filter before the gas tubes then it is fine (use input cap of a small value thought). You will also need much lover voltage on the secondary of the bias supply transformer. With input choke the bias need to be 220V as the input choke will eat up ~10% and the gas tubes need 190V to light up. With input cap you will have an increase voltage from bridge and I would go for 140V-150V on secondly if you use CRC…

5) You might consider do not make a dedicated PS for positive bias but to take it via a resistor right from C2 capacitor. I did it and I did not see any worsening in sound.

6) Do, not screw with Milq’s bias principle for both states. The input stage should be in Milq exactly as it is and the output stage should be fixed biased. Keep the R6 of very good quality, and keep it very short and right at the grid. Bring the return to ground of C5 right to the V2’s ground.

7) The C12 capacitor is not relay necessary if your C9 capacitor physically located close to VR2 attenuator.

8) If you never used 6C33C before then print many posts at this site about this tube and put them in your restroom. Sometimes when you spend long time in there please read about the tube. Do not forget to heat the tube for a long time (40-60) minutes before REALLY stressing it.

9) Amorphous core output transformer is absolutely mandatory for this amplifier. There are a number of companies that do it. Find it, pay premiums and get the amorphous transformers.

10) In the circuit I marked the out stage operation at 225V and 180mA. However, these markings are only for 200mA Lundahl transformer. Lundahl can not gap them for more current as they have fixes core size and any increase of currant will reduce inductance of primary with consequential loosing of bass. Even at 225V and 180mA with 200mA on LL1627, loaded to 8:1 (depends of your speakers) the Milq does very fine. Still it is for my speakers.  If you are not using the off the shelf Lundahl but go for a custom transformers then I would suggest to stay with 190-200V and run 250mA across the tube, with a transformer gaped at 300mA. Sure, it will greatly depending from your speakers - do not forget the Milq has no feedback and therefore it is very sensitive to load. Do not use the transformer taps under any circumstances. Anyhow, you can go as low as 170V and as high as 250V, driving from 180mA to 330ma across the tube, loading it from 5:1 to 12:1. Increase current lower plate impedance and adds transients… You will need to play with current and loading in order to please your speaker… BTW, do not forget that the bass section of your loudspeakers and the HF section of your loudspeakers might have different optimum loading demands…. but I promised don’t talk about DSET in this thread…. 

So, my recommendation for the folks with 300mA transformer would be for average circumstances of above 12R loudspeaker to go for 200V/250mA (on full tube).  It largely would be OK for people who use normal, mid colorfulness Alnico compression drivers. With very flowery drivers you might slightly drop current and with very dull drivers or with ceramic drivers you might drive more current through the output stage drop voltage. It is always a good idea to have an extra gap in transformer that would allow playing with current. The 6C33C will slightly fluctuate current with signal, even with low PS impedance, so to have extra DC capacity in your transformer is good idea to keep away form saturation. Let your transformer maker to advise you about the balance between the transformer core size and the diameter of the turns… Let them also advise you how much excessive gap would be desirable. From one perspective with amorphous core it is hard to get bass out of transformer from another perspective the amorphous core tolerate proximity to saturation with more damage to sound then regular non-amorphous core…

11) Do not save money on the output transformer. It is perfectly OK if the output transformer will cost you as much or more even a few times then the rest of your Melquiades. I assure you that Milq will do sonically wonderful thighs. You assure yours that you will get for Milq a deserving transformer.

12) Put two 10R, 5W resistors (in each leg) between the rectification bridges and secondary of the power transformers.

13) Read my article about the gas regulator tubes:  http://www.goodsoundclub.com/GetPost.aspx?PostID=2792

14) The 6C33C tube sockets are very bad, unless you go for expensive Johnson tube sockets. Still it is not too difficult to replace the cheap 6C33C tube sockets once in 2-3 years. You will extend the live of the 6C33C tube sockets if you clean the 6C33C pins of your every NEW tube. The pins are covered with some freakish candle-like material. Use fine sand paper to brash the pins up and to remove the material.

15) If you do not cool down the Milq internals then allow some space for 6C33C to breathe. Make 3”-4” around the tune as the parts-free zone and drill some ventilation holes around the 6C33C - it runs hot. Twist the filament wires to the 6C33C socket and then solder it. I have seen as in not cooled down tight enclosure the heat of 6C33C melted down the solder on the filament pins. Use the 6C33C pins a high temperature solder. BTW, do not use heavy silver solder anywhere in signal pass. The very light-silver solder (like Wonder solder) is tolerable.

16) If you have a very good quality VR2 that can handle some power then use it and get rid of the R19, R18 chain. I used the 10-turns Burns that are 2W I believe and the R19, R18 are juts to keep the attenuator cooler. Keep the VR2 as good quality as you can get and put R20 as close to the 6C33C’s grid as possible (do not burn if by the tube though)

17) There are a very few wires in Milq – it is very simple amp and most of the parts might be connected by their natural leads. Sure no silver wires must be use anywhere but almond all equally good cupper wires that you will chose to use some wires are more important in Milq then other. You will have a wire between negative pin of C9 and R18. Pay attention to that wire. It layout, the proximity to ground and etc is auditable…

18) R2, R12 and R23 should sit right in the tube socket.

19) The Milq even without loading resistor has enough impedance from the bias resistors but I still like to current-load my cables using 20K resistor as R3.

20) Use good quality tube socket for 6E5P. it is very fast tube and it has some minor tendencies for microphonics when is it getting worm (not as horrible as some other tubes through). The Connex 70032, the 9-pin tube socket does very well and it is not too expensive. Expect approximately on year from a single 6E5P with approximately the same from 6C33C. it is $12 per year – it will be all maintenances that you need to do on Milq.

It is all that I have atop of my mind for now. If something else come to me  then will dump it here….

Good luck,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
07-04-2007 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 2
Post ID: 4708
Reply to: 4423
My Super Melquiades modifications: 2007

My project to add 3 one-stages channels to Super Melquiades look like progressing (it means I will have the new 15,5:1output transformers very soon) and in  context of upcoming changes and, after long consideration and  some tests, I desired to  combine the addition of the one-stages with some other modifications. Here is the list of the changes the Super Melquiades will endure (besides adding 3 more channels that itself is a major invasion):

1) Elimination the current filament 6.3V/12.6 transformer and replacing it with   new 12.6V/15A toroidal transformer. All 9 Super Milq’s 6.3V tubes will be paired and driven by 12.6. (Do you know who makes standard serial 6.3-0-6.3 toroidal for 12-15A in order avoid going custom?)

2) Dropping the plate current of the out stage from 220V to 190-200V. The new plate transformer will be introduced: 220V/3A. Since, the HF channels will not be driven by 6C33C anymore I do see a rational to drop voltage and increase current on the 6C33C’s plate.

3) A new fan will be added to cool down the cluster of the very narrow positioned six 6E5P/6E6P tubes.

4) The peripheral wholes around the 4 large B+ capacitors will be sealed, converting the internals of the Super Milq into air-taught with objectives to navigate the air flow from of the Super Milq’s main fan more prissily.

Rgs, Romy the caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
08-08-2014 Post does not mapped to Knowledge Tree
shannon
Posts 23
Joined on 08-08-2014

Post #: 3
Post ID: 21159
Reply to: 4423
Lokkimg for clarifiation
fiogf49gjkf0d

5) You might consider do not make a dedicated PS for positive bias but to take it via a resistor right from C2 capacitor. I did it and I did not see any worsening in sound.

I'm not sure i fully understand what you are saying here, could you clarify.  How would this change schema v4.4

08-08-2014 Post does not mapped to Knowledge Tree
shannon
Posts 23
Joined on 08-08-2014

Post #: 4
Post ID: 21160
Reply to: 21159
Melq breaks to many "moron magic rules"
fiogf49gjkf0d
people cant handle that it must have no cathode resistor.  That r2 must be 15k. that gas tubes must be used but not for regulating voltage. etc.etc. well if you want good sound anyways.  
I think many people probably have built it. It is so ridiculously simple and can be cheap really. If no amorphous opt was used(i do not condone this idea)its super cheap. The people that build this likely don't worry about posting on forums.  build it and forget about amps until you need to build another one or need supermelq. That was me anyways.
sorry was supossed to be in one year later thread
08-11-2014 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 5
Post ID: 21163
Reply to: 21159
Positive voltage
fiogf49gjkf0d
Positive voltage supply does nothing but balance zero volts at impost. You can go for "pure" implementation and to get a dedicated PS of you can take voltage from any positive voltage, let say from B+ of a driver tube, use voltage divider and drive with it a left side of the biasing resistor.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-07-2014 Post does not mapped to Knowledge Tree
Vincin
Posts 2
Joined on 12-14-2011

Post #: 6
Post ID: 21263
Reply to: 4423
VR tube biase
fiogf49gjkf0d
Hi,

I buillt the amp based on your circuit with the exception of the bias scheme. Currently I have CRCRC bias for the ouput valve and Lithium battery grid bias for the driver. I use the amps to drive low efficiency 2 way ported boxes and vintage Tannoy coaxials to play girl & guitar music and occationally some chamber classical music. All standard parts and home-made OPTs, chokes and power trans wound by a friend of mine on the M6 silicon steel lams.

I'd like to report that the amp sound really good, even on my "shitty speakers for morons", given that the amp is not driven too hard. On moderate volume and simple music, the amp is transparent and no distortion that I can detect. I have a tweaked out 300b amp using most expensive ions and parts that do not compete very well with this 6C33C amp. Someday when I get less lazy, I will try to have some amorphous OPTs custom wound, and also the VR tube bias but at the moment I doubt on my speakers I would hear any meaningful improvements (any comments please?).

Also, I have been surprised how low costs the amp can be built.


Thanks Romy for sharing your passion. I have read your site for a couple of years, and found the site and your journey very entertaining even though like most moronic audio people I have no incentive to go so far (no ass kissing! intended).

Tks. Vi
10-07-2014 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 7
Post ID: 21264
Reply to: 21263
Melquiades' message.
fiogf49gjkf0d
Vincin, thank you for appreciation of my work.  A few comments and thoughts about the direction you went. 
 
I do think that to compare 300B with your version of Milq is not proper way to demonstrate or to learn anything about sound, particularly with low sensitively speakers. I am not a huge defender of 300B but if 300B is properly cooked then she has to be able to stand on her own, not that it has to be "better" or "worse" but the proper DHT has own interesting aspects that is very hard for Milq to compete, possible but hard.  Most likely you have very bad 300B structurally that juts can't not drive your loudspeakers and Milq is just more powerful amp that can.
 
About your implementation. The CRCRC bias for the output is fine. The Lithium battery grid bias for the driver is not. I am not saying that Lithium battery grid bias is a bad idea all together. I personally do not like it wherever I heard it but I have no business to insist in any general topologies of amp building. What I AM very competent is the Milq topology/sound consequences. The amp that you built is not Melquiades but rather 6E5P-6C33C amp. There is nothing wrong with it and it is most likely a very good amp but it do not have the "Melquiades' message".  The hard of the Milq design is the selection of the driver tub and bias of the driver tube. THAT make the Milq to sound in a way unique and with battery bias the amp sounds to my ears a bit mechanical, overly glossy, too linear dynamically and too unintelligent at dynamic margins. If you want you might try the gas tube version with time. Do not worry about anything that goes before gas tubes – you can use any PS you already have in the amp, juts drive 15-23 mA across the negative tubes and mimic what was done in Milq after gas tube. You do not need even positive tube voltage for experiments – you will have some DC on input – so do not switch cable while the amp is up.
 
If you use vintage Tannoy coaxial then neither your 300B not Milq are not good for you – go for 100W SS amp. You will see what I mean. The Low power tubes amp might be used with them (particularly with Gold) but only for getting what I call "boutique sound", or rather boutique sounds.
 
If you go with amorphous OPTs custom wound then you might test the idea somehow as amorphous give you slightly faster transients and in my experiences it always make me to load the amp slightly heavier with amorphous in comparing with any, even fast steel. I would say you might want to consider good 20-30% more heavy 6C33C loading if you got from M6 to amorphous.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
10-07-2014 Post does not mapped to Knowledge Tree
Vincin
Posts 2
Joined on 12-14-2011

Post #: 8
Post ID: 21266
Reply to: 21264
Bias
fiogf49gjkf0d
Romy, 
Sure, the tone could be a bit more special ie: delicate and colorful (sorry for lack of the right word). Thats why I have come back to these pages to read and hopefully understand a bit more and find the right incentive to tinker further. 
I have a bunch of gas tubes but they are 0B2 which are 105V tube, not the 0A2 you prescribe. Any reason to pick the 0A2 and run high current 25ma through them? 
When you said too linear but unintelligent dynamically, do you mean the amp would sound very loud and appear to be able to push sound dynamically but there are too many faults in the amp dynamically as such the reproduced sound is not interesting, in other words it is predictable & boring? Actually this one is over the top for me and I have no idea so I just guess what you meant. I know whether an amplifier/speaker/system restrict dynamics too much or they reasonably do not do so. Call me a moron or whatever names but educate me. 
Thanks, V
10-07-2014 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 9
Post ID: 21267
Reply to: 21266
Intelligent dynamic viscosity
fiogf49gjkf0d
Generally the 105V gas tube are the best and the most stable gas tubes and if you are willing to use them then it would be a good idea. You need to recirculate the whole bias securely to do so and it is tricky. It is not so hard to figure out how to get from 105V the 4.3V of bias but they are bias line and whatever you do with it hugely affect sound. The last resistor and the last small cap – all of them do impact sound. You can do your own experiments of you can use my template. My secretary works the vales in there are actual values. You do not need to follow but you might if you wish. 

When I was taking about “unintelligent dynamically” I was referring that the driver tube with my bias demonstrate something that I called intelligent dynamic viscosity. Find it, I have write about it a lot. This “intelligent dynamic viscosity” is the key in the amp and without getting it with my bias I assure you that you did not build/heard Melquiades.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-04-2015 Post does not mapped to Knowledge Tree
shannon
Posts 23
Joined on 08-08-2014

Post #: 10
Post ID: 21473
Reply to: 4423
Couple of questions
fiogf49gjkf0d
 Romy the Cat wrote:

3) There is a mistake in Milq circuit. The B+ of the driver stage has almost insufficient amount of critical inductance. It was because I drew the circuit having the Super Milq in my head where the PS was feeding 3 stages and consequently drew more current. I recently opened my full range Mils and confirmed that I have not 15H coke in there but 30H. So, ether you increase the current you draw across the PS lowering the R23 bleeder or increase the value of the L1 choke (Hammond has 30H and 40H chokes that do very nice). My presumption is that any PS with input choke should be tested in continuity, so it is easy to see what is going on….

4) It is not necessary to run input choke filtration for the Milq’s bias supplies. If you wish to do for CRC filter before the gas tubes then it is fine (use input cap of a small value thought). You will also need much lover voltage on the secondary of the bias supply transformer. With input choke the bias need to be 220V as the input choke will eat up ~10% and the gas tubes need 190V to light up. With input cap you will have an increase voltage from bridge and I would go for 140V-150V on secondly if you use CRC…

12) Put two 10R, 5W resistors (in each leg) between the rectification bridges and secondary of the power transformers.

Romy the Cat


3) For the 30h do you change r23 to like 42k?  the arrow from r23 to l1 seems to imply that r23 depends on the choke. does this effect r2?


4) what is your opinion of small value input cap?  the schematic 4.4 has 100uf with choke input, is this small


12) what does this accomplish, what does this change in the rest of the circuit. If you used high current fred instead of sic schottkey does this still apply


thank you 

01-05-2015 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 11
Post ID: 21474
Reply to: 21473
A couple of answers.
fiogf49gjkf0d
**** For the 30h do you change r23 to like 42k?  the arrow from r23 to l1 seems to imply that r23 depends on the choke. does this effect r2? 

Yes, they are related. the R23 in the supply of the driver state is just a bleeder. If you drop R23 then more current will flow across the choke and you will sooner hit minimal inductance. If you do so then make sure that your coil at the power transformer is able to handle more current. Whatever you in there shall not affect R2, unless you go with super low current and super inductive choke with very high serial DCR that would sunk the voltage. The voltage adjustment i is not done by R2. It is loading resistor and keep it as it is. 
 
*** what is your opinion of small value input cap?  the schematic 4.4 has 100uf with choke input, is this small 
 
Actually it is not small but if you would like to rise it then be my guest. You see, this is LCRC filter where the first cup is not for full filtration but for forming proper LC input, then you have a decoupler by a resistor and then the main filtration come to the play. The choke input configuration and the values are well described in technical literature, seek and you will find. Warn you that in input choke configuration choke is a critical element, the values of a cap to ground is semi-irrelevant of it followed with another filtration stage.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-09-2015 Post does not mapped to Knowledge Tree
dl
Posts 3
Joined on 01-26-2011

Post #: 12
Post ID: 21486
Reply to: 21474
"got milq"
fiogf49gjkf0d
It might be true that a properly configured Milq will cause you to forget about amps for the foreseeable future, if not forever...but really it is not so simple, especially if you are accustomed to particularly high-performing (unfortunately offensively expensive, for the most part) SET amps. If you are used to middle of the road crap, or worse, as the great majority of audio enthusiasts are, then the Milq is a categorical, unqualified winner, "stock" from your local builder. It is extraordinarily fast (not just in terms of acceleration, but also deceleration, where most of the realism typically missing in audio actually lies) and open sounding (wow, soundstage!), and has unusually good (great?) bass. But taming this circuit to your sonic demands (I don't say "expectations," and I doubt that most listeners even have "demands") is a very, VERY involved process, both technically and psychologically. From the first notes, there is a huge promise -- a combination of extreme power (sounds like 100W -- or 1000W, if you opt for the LL1693) and extreme passiveness (every inch of cable radically changes the sound of this amp) -- that will convince you that you can finally control every aspect of your overall sonic presentation. But you will be swapping out everything from DAC's to diodes to drivers to capitalize on what you have now discovered (the double-edged sword of "transparency"). The Milq is a tabula rasa, not a quick fix for beginners, and thankfully I am not one. But whatever your experience, the Milq somehow turns you into a beginner, like it or not, and you very well might not leave with the same "religion" you came in with. As I did, you might arrive at an unusually LYRICAL and "perfect" sound. But some years later! And you will still be left with a 5-year plan for what's next...

milq 003.JPG
01-11-2015 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 13
Post ID: 21488
Reply to: 21486
Ok, let talks about Milq….
fiogf49gjkf0d
dI, thanks for your post. It is an interesting post, might I comment upon it? I do not share your experience with Melquides amplifier even those I know exactly what your were taking about when you wrote about changing own expectations by observing the amp performance. I went over exactly the same things during my few years with original Lamm ML2.0, which I consider is way more powerful educational tool then Milq. The objective of Melquides was to much sonic and exoteric ML2’s performance. To a degree Milq did and in some extend went way beyond ML2 as Lamm amp is very rigid in his performance expressionism and has very strict presentational boundaries. 
 
Can a properly configured Milq will cause you to forget about amps for the foreseeable future? I would probably say no. If you have sophisticated tonal demands then probably the word of vintage DHT might deliver to you more results mostly, one-sided results however.  It never was a problem to me as after making the Milq I immediately went to DSET with Milq – a very different world all together. There is another whole array of characteristics where I feel Milq would lose to a specially tailored amp.  All together however, I think Milq is a very reasonable and well balanced amp.  
 
To forget about amps is not truly sonic state but rather the state of wondering of audiophile mind… It is a complicated subject and I do not want to talk about it now. What is interesting in your post is a derivative question: when an audiophile mind and his listening preferences are evolved and sound made by Milq become no enough. I feel that in DSET configuration, the vintage drivers and DHT at MF it might be satisfactory for very a long time.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-11-2015 Post does not mapped to Knowledge Tree
dl
Posts 3
Joined on 01-26-2011

Post #: 14
Post ID: 21489
Reply to: 21488
Aha! But you're getting ahead of myself
fiogf49gjkf0d

Right. I do not mean to suggest that my own solution for arriving at an acceptable global result using the Milq full-range was not a short-cut with regrettable new weaknesses (or just missed or postponed opportunities). But I am curious (wary) about what you mean by the “one-sided” results of using a DHT for the upper midrange (if I misread you correctly). I also wonder whether it is even conceivable that such an amp might use valve rectification and still keep up with the Milq. Suppose further that it was asked to drive not only a compression driver but also a 6” paper cone from 400Hz to 1000Hz? I want to doubt all that, but I haven't thought about it too much. What I do know is that I am quite allergic to the sound of solid-state bridge + 6C33C + amorphous iron in the upper midrange. However, with oversized, steel-core OPT's, lowish end of permissible voltage (not starved!) on the 6e5p, foil caps on C4 and C5, and a system-wide ban on silver molecules (ok atoms), you do start to get a peculiar, stoic elegance out of this tube, and you do not lose too much. Though I am keen on trying a DHT to play along with the Milq, I suppose it's easier said than done. There are a lot of amps out there using celebrated or obscure triodes but which have precious little in the way of tonal sophistication. Less than my Milq, anyway.

As for the M2, I heard it only once in a very controlled environment (one of these demonstration rooms in NYC where you are made to feel that you ought to have paid admission just to behold this or that sonic magnificence, and then kicked out after one movement of something like “Hilary Hahn” played back on a $75,000 CD player). If I'm honest, I was amazed by the sound. But I did not really do much about it at the time. I was using ANJ M77 and Neiro (parallel 2A3) then and had not yet discovered real problems with that amplification. Also, the Kondo, even if it has a particularly strong sonic signature, benefits from an organic-sounding tonal shaping, whereas the Lamm sounded more synthetically processed (and I did not know, or care that much, if it was some Disney-esque production quality of the recording or something else).

01-12-2015 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 15
Post ID: 21490
Reply to: 21489
Everything about everything
fiogf49gjkf0d
 dl wrote:
But I am curious (wary) about what you mean by the “one-sided” results of using a DHT for the upper midrange (if I misread you correctly).

  What I meant is that practically no one uses "a good DHT for the upper midrange". Usually people make a good DHT with good DHT driver end up with astronomical cost and then understandable use it as full range amp, having compromise, power, dynamic, up and down extensions and many other things. It is not to mention that "a good DHT for the upper midrange" might not have proper loading for let say upper bass… As a result it is frequently that even a promising amp, without doing to DSET, might not deliver all together possible-to-be-delivered sound in context of most of installations.
 dl wrote:
I also wonder whether it is even conceivable that such an amp might use valve rectification and still keep up with the Milq.

Why not. I am not against any valve rectification, particularly for MF amps. To "keep up with the Milq" is a bit more complicated subject. Milq is not a reference of any kind and there is no need to keep up with it. If you multi-amp then you do want the amps work together in the same way. I however feel that type of the rectification in case of matching the multi-amps is less prominent factor. In term of rectification BTW, the LCLC approach with super fact switching bridges deliver very good result and I do not know if it were necessary to have all of those trouble with valve rectification. My initial tests with 6C33C indicated that valve rectification was inferior to LCLC, particularly in bass. I did not experiment with valve rectification for my MF-only DH DSET.
 dl wrote:
Suppose further that it was asked to drive not only a compression driver but also a 6” paper cone from 400Hz to 1000Hz? I want to doubt all that, but I haven't thought about it too much. What I do know is that I am quite allergic to the sound of solid-state bridge + 6C33C + amorphous iron in the upper midrange. However, with oversized, steel-core OPT's, lowish end of permissible voltage (not starved!) on the 6e5p, foil caps on C4 and C5, and a system-wide ban on silver molecules (ok atoms), you do start to get a peculiar, stoic elegance out of this tube, and you do not lose too much. Though I am keen on trying a DHT to play along with the Milq, I suppose it's easier said than done. There are a lot of amps out there using celebrated or obscure triodes but which have precious little in the way of tonal sophistication. Less than my Milq, anyway.

Well, I do not feel that 400Hz to 1000Hz is an upper midrange at all. I consider it to be lower midrange not upper. If the sound you get out of 400Hz to 1000Hz is not what you like then a few things that you might consider. What driver you use and what enclosure? If you like the amp overall but do not like this specific region of 400Hz to 1000Hz then it is likely not the amp problem but your acoustic system. What is definition of you "being allergic". Can you provide more specific criticism of what you do not like in sound? Also, if you have 2 Milqs then can you use a second one to drive your 400Hz to 1000Hz channel and slightly more idle this second Milq? In many cases the lower midrange is too heavy loaded by wide-band amps, DSET or picking a good dedicated lower midrange driver would certainly help a lot. You might also to drive your 400Hz to 1000Hz from different section of the same OPT that you drive your MF. Let say you load your MF at 1000R but you might load your 400Hz to 1000Hz at 1800R, taking signal from different sections. I would be more specific to advise you something to try if you will be more specific to explain what exactly you do not like.
 dl wrote:
As for the M2, I heard it only once in a very controlled environment (one of these demonstration rooms in NYC where you are made to feel that you ought to have paid admission just to behold this or that sonic magnificence, and then kicked out after one movement of something like “Hilary Hahn” played back on a $75,000 CD player). If I'm honest, I was amazed by the sound. But I did not really do much about it at the time. I was using ANJ M77 and Neiro (parallel 2A3) then and had not yet discovered real problems with that amplification. Also, the Kondo, even if it has a particularly strong sonic signature, benefits from an organic-sounding tonal shaping, whereas the Lamm sounded more synthetically processed (and I did not know, or care that much, if it was some Disney-esque production quality of the recording or something else).

Well, unfortunately whatever Lamm ML2 was today is dead and the true sound of that amp might be obtained only by chasing 15 years old heavily-used amps. BTW, I did hear a few very positive result with ANJ but it was in context of a small-single drive mini-monitor and in very limited range. 


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-13-2015 Post does not mapped to Knowledge Tree
dl
Posts 3
Joined on 01-26-2011

Post #: 16
Post ID: 21491
Reply to: 21490
Something about most things
fiogf49gjkf0d

Thanks, Romy, for your generous reply. I won't try to address everything about everything, but let me bore you with a mini-history of what is going on with my playback so you will understand where I'm coming from and where I'm trying to go. And how I wound up with the Milq in the first place.

Back in the days when I used the ANJ, I was using a pair of the small Hoerning speakers. These were fine, but you got the sense that it was really a 4-way speaker with one of the channels – mid-bass – removed. Or you might say it is a 2-way speaker with a built-in subwoofer. Anyway, I noticed even with the huge Hoerning “Alkibiades” towers, that as you listened you could “see” the missing...maybe pair of 10” low-mid/upper-bass drivers per side or maybe 12” driver. But Hoerning did not go in that direction – in fact his new big speakers use 16 8” bass drivers per side but downsize the midrange driver from the 8” Lowther DX3 to the 6.5” DX65, which is not nearly as good sounding as the 8” one, first of all, and also makes the one stand-out problem with the old version audibly worse. Anyway, I decided more or less at that moment that I ought to try to build a speaker system myself.

In the meantime, I had heard some horns for the first time, just a pair of old YL compression drivers in metal horns which I stuck on top of my Hoernings, and was seduced. I was not really ready to start a construction project, so I just bought a pair of 2-way horn speakers from Aspara Acoustics – a 12” Precision Devices driver and a sort of radial horn mounted vertically on top. It was not long before I realized that now what I had was actually a 5-way speaker with 3 channels removed. There was no real “bass,” and in fact no tweeter at all, but more importantly there was no midrange anymore. I decided that “audio” was getting way too complicated and was detracting from my enjoyment of music, and I impulsively sold my entire system. I later wound up with a single-driver speaker from Audio Tekne (with a Diatone 610 in a leaky box) and drove it with a push-pull 300B amp. I moved my new system to a small room in my apartment was happy for a long while!

Then I moved to a place with only one large room, and the Diatones just sounded diminutive and “lost” in there. I figured, maybe now is the time to fix those old audio problems. My logic was, I did love that 6” Diatone driver, so why not try a 12” alnico driver and put a horn on top, then look for a midrange driver to put in-between. Last, I would worry about deep bass.

This plan did not work, at least not at first, because the Altec 414 I started with is a crappy and bloated sounding driver, overrated in every way. I did discover the JBL 2440 during that time, which I still use. To replace the Altec, I first tried the 12” alnico driver from Supravox (285-2000). This driver is also a headache for 2 reasons. It has such a strong magnet (2.1T) that it is impossible to get any mid-bass out of it. Second, it has a nasty sharpness around 1-2kHz, which, I am told, is due to the fact that the phase plug has a neodymium magnet inside of it (??!!). I used a series resistor to lift the Q, but I could not put up with the “veiled” (from the resistor) or the piercing (from the phase-plug) for very long. I went instead for the 285GMF, which has a more reasonable magnet (1.4T).

As the transparency of my system began to increase, I discovered that my push-pull 300B amp was actually awful sounding (even though I had no complaints when it drove the 92dB Diatone). I tried several 300B SET amps, i.e., middle-market ones, and these had no bass control whatsoever. I was always high-passing the 285GMF, even with air-tight enclosures. Then I thought: hmm, why don't you get someone to build you a Melquiades amp!

Fast-forward to the present, and I still have that same problem I started with. Namely, there is no “mid” (what I am calling 400Hz-1000Hz) in my setup. If I use the GMF in a high-passed bass-reflex arrangement, the upper-bass really comes to life, but the mid becomes thin and washed-out. Mostly to avoid port spillage issues, I keep it sealed, and though there are no obvious problems, the sound is fairly flat, boring and literal. But as you lift the volume, you realize that the midbass is doing a lot of things that you wouldn't normally expect. It's very tight, but also “broad” and expressive.

The reason I ask about using a DHT “add-on” amp for my non-existent midrange driver (and which would also drive the 2440) is that I worry that I will never find a 6” or 8” driver to play along with the 285GMF. This is partly because of level matching, but also because as you increase the inductance on this “woofer” it sounds more and more veiled, slow and boring. So if I am going to introduce another amp, I would ask it to play from 400Hz up.

But the idea of using different combinations of sections from the LL1693 is interesting, and perhaps I should buy a pile of drivers and start experimenting. Just browsing ebay, you notice lots of things, like this alnico 8” driver with Fs 100Hz and 97dB sensitivity, pulled from a garbage dump:

CRAFT 20VN.JPG

Who knows. I would like to use such a driver in a Voigt pipe (or I guess sealed since the Q is something like 1.3), then go back to high-passed bass-reflex on the mid-bass driver.

As for my allergy to the amorphous-core OPT's in the high range, it's just a sense of raw, as if all the mechanical elements of the tone were chipped away like flecks of rust, then sprayed into the room a fraction of an instant before the timbre. I managed to counteract this obtrusive sense of distortion, on digital, with a warm and puffy sounding NOS DAC using microphone transformers at the output. FM tended to sound fine. But I was getting headaches with vinyl, even with lush sounding cartridges, and I got really tired of that DAC. With steel-core, the sound is much smoother. At least coming out of the 2440.

-Darren

01-13-2015 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 17
Post ID: 21492
Reply to: 21491
Talking about amp….
fiogf49gjkf0d

Darren, I understand what you say. I would like your confession about acoustic system with any comment as this is amp thread and I would like to be on more or less on the subject of the thread.
 
I do not know the 285GMF driver but it is very common for the bass drivers with cupper cap to have a situation what the filter coil "talks" with instanced of voice coil and the filter become less effective, letting the driver to shot-through much more then you would like it to. Well, by-amping is certainly help in this situation of going for subtractive filters where no serial coil is use but rather a parallel cap.
 
I do not have any allergy to the amorphous-core OPT's in the high range and I do not think you do. What you describe sounds to me not amorphous-core contribution but rather the evidence that you do not load your OPT properly. Make a simple experiment. While your amorphous-core OPT produce overly raw sound take a 4 resistor of a few watts and short the secondary of your OPT, or your speaker driver terminal. By doing it you will lower the impedance of your speaker and will load the output stages with that amorphous-core OPT much harder. You will have many thing different changed in sound but then you will also will instance see that this "overly freshness" that you do not like will be gone. You then might remap your transformer and keep using it. Be advised that as you load your output stage the gain of your amp will rise as well.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 1 of 1 (17 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Super Melquiades Amplifier...  About the Super Melquiades Bass....  Melquiades Amplifier  Forum     29  268781  07-16-2005
  »  New  Building Melquiades: Chronicle of full-range..  VR2 issue leading to jump in current on 6C33 tube...  Melquiades Amplifier  Forum     44  411971  06-09-2006
  »  New  “Melquiades” amplifier: a year later...  Considerations about Melquiades’ layout....  Melquiades Amplifier  Forum     33  318676  10-05-2006
  »  New  The one-stage Melquiades...  It's time, what amorphous opt...  Melquiades Amplifier  Forum     74  654904  04-21-2007
  »  New  Has anyone built the DIY Melquiades amp??..  You did not reply what music you are listening….....  Melquiades Amplifier  Forum     2  35641  08-24-2007
  »  New  The Melquiades' "Remote Biasing"..  The Melquiades' "Remote Biasing"...  Melquiades Amplifier  Forum     0  22252  02-05-2008
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts