| Search | Login/Register
   Home » Horn-Loaded Speakers» Macondo's Axioms: Horn-loaded acoustic systems (121 posts, 7 pages)
  Print Thread | 1st Post |  
Page 3 of 7 (121 items) Select Pages:  « 1 2 3 4 5 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Romy's Horns..  RE: Still Romy's horns...  Horn-Loaded Speakers Forum     3  61835  04-14-2005
  »  New  The “Dead Points of Live Sound”..  Confused...  Playback Listening  Forum     28  312800  05-14-2005
  »  New  Macondo Horns: biography...  Macondo with Pussy Eyes....  Horn-Loaded Speakers Forum     2  61029  05-18-2005
  »  New  The IDEAL horn system..  Serious Coax? Where?...  Horn-Loaded Speakers Forum     27  184015  12-11-2005
  »  New  Adding one more spherical to Macondo...  It is about magnet and SS type....  Horn-Loaded Speakers Forum     92  926582  05-23-2006
  »  New  45Hz Bass Horn..  Can We Ever be Saved From Ourselves?...  Horn-Loaded Speakers Forum     23  306283  09-19-2006
  »  New  The most promising “best” commercial speaker..  Munich High End 2023...  Horn-Loaded Speakers Forum     192  1734844  12-06-2006
  »  New  Macondo Frame modification...  Parquet...  Horn-Loaded Speakers Forum     46  445962  12-22-2006
  »  New  RAAL “Water Drop” tweeter for Macondo...  Your comment takes me by surprise...  Horn-Loaded Speakers Forum     77  893542  02-16-2007
  »  New  How to USE “Resonating Oops” in loudspeakers..  Injection?...  Horn-Loaded Speakers Forum     184  1470052  02-28-2007
  »  New  Jessie Dazzle Project..  Will this better to be auditable?...  Horn-Loaded Speakers Forum     172  1509199  08-03-2007
  »  New  Proximity of horn’s crossover and it’s ability to care ..  Does this explain or relate to the "trombone"...  Horn-Loaded Speakers Forum     2  35680  09-16-2007
  »  New  Stop having a fear of horn vignetteing..  Eclipsing the feathery edge...  Horn-Loaded Speakers Forum     1  26637  12-14-2007
  »  New  My (Amplification + Acoustic System): what is next?..  Macondo and Melquiades in the NEW room....  Audio Discussions  Forum     41  301269  01-10-2008
  »  New  Make your own horns?..  I have no wet dreams about horns…...  Horn-Loaded Speakers Forum     1  27310  01-22-2008
  »  New  All Active! A DSET and multi-way acoustic system...  Hahaha...  Audio Discussions  Forum     14  119621  01-31-2008
  »  New  Who makes horns? Architectural options...  Who makes horns? Architectural options....  Horn-Loaded Speakers Forum     0  18932  02-29-2008
  »  New  Macondo vs. the “industry sponsored speakers”..  Correction : "Man in the street"...  Horn-Loaded Speakers Forum     4  57317  05-11-2008
  »  New  Experience Music Horn Installation @ VSAC..  RCA MI-1428B vs Vitavox S2...  Horn-Loaded Speakers Forum     25  266089  05-27-2008
  »  New  ... again on GOTO Unit drivers.....  GOTO installation in Lithuania....  Horn-Loaded Speakers Forum     108  1101355  08-16-2008
  »  New  Compression Drivers -in general..  Do the things progressively…...  Horn-Loaded Speakers Forum     25  229036  10-19-2008
  »  New  The state of High-Efficiency Loudspeakers...  Tom Danley’s brilliant law...  Horn-Loaded Speakers Forum     6  87672  02-25-2009
  »  New  Macondo listening experience..  Actually I disagree with your assessment....  Playback Listening  Forum     4  53331  06-16-2009
  »  New  Battling stupid Horn Criticism as a concept..  Some Brit’s take on the Horn sound.......  Horn-Loaded Speakers Forum     32  209777  08-03-2009
  »  New  MacondoLite..  The Count Alessandro di Cagliostro’s methods....  Horn-Loaded Speakers Forum     18  178519  08-15-2009
  »  New  How to select mid/upper bass horn drivers...  How to select mid/upper bass horn drivers....  Horn-Loaded Speakers Forum     0  24716  08-25-2009
  »  New  Engaging the David Haigner’s ideas..  The degree of disagreement correction...  Horn-Loaded Speakers Forum     7  84940  08-30-2009
  »  New  Tightening to loosening Screws ? no fake.....  Screws are BACK again...  Playback Listening  Forum     13  102286  10-16-2009
  »  New  Meyer X-10..  Here is another example …...  Horn-Loaded Speakers Forum     3  52697  10-28-2009
  »  New  Many Mani's options: My first horns..  Well, you need to read a whole book....  Horn-Loaded Speakers Forum     27  145019  01-20-2010
  »  New  New speaker system..  One more horn speaker system to look at...  Horn-Loaded Speakers Forum     6  88917  03-16-2010
  »  New  Time alignment of drivers..  Capacitors...  Horn-Loaded Speakers Forum     16  132091  08-17-2010
  »  New  Macondo’s lowest channel...  What truly are you tryin to accomplish?...  Horn-Loaded Speakers Forum     150  1343826  09-15-2010
  »  New  About HF Binaurallism..  What is going on now....  Playback Listening  Forum     1  24364  11-27-2010
  »  New  Basic guide to advanced audio..  The 3-legged (running) Dog of GSC Hi-Fi...  Playback Listening  Forum     62  519086  07-23-2011
  »  New  Rakeshorns..  Excellent walls....  Horn-Loaded Speakers Forum     33  286459  08-26-2011
  »  New  Canadian Speaker Proposal..  Drivers/Speakers As Filters...  Horn-Loaded Speakers Forum     56  338357  06-21-2013
  »  New  Deep End DIY - Australian take one Macondo...  It is simple, but......  Horn-Loaded Speakers Forum     87  289183  01-20-2016
  »  New  Remedies the Beauty..  Supertweeter...  Playback Listening  Forum     293  205112  10-13-2021
  »  New  Macondo 2.0?..  Confused!...  Horn-Loaded Speakers Forum     24  14826  11-18-2022
04-02-2008 Post does not mapped to Knowledge Tree
I.M.Distortion


Posts 9
Joined on 03-25-2008

Post #: 41
Post ID: 7086
Reply to: 7085
Macondo's driver alignment with string
Use a ladder tye end of string put other end threw the horn you use for 1000Hz take off driver, measure front of driver to poll piece, that is were the diaphragm mounts to. add that to your measurement and that is were you put the tape. Then with the string go to all drivers and woofers and use that distance on the string. A for instance, if your woofers were horn loaded in your enclosure go to the exit of the enclosure and put your string threw it to the back plate behind the cone, for time alignment then sound will hit your ear the same time as the HF horn's But as you say if the horn is off axis time alignment will have to go around the horn and will take longer to hit your ear so with this problem time alignment cannot be achieved. Distortion
04-02-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 42
Post ID: 7088
Reply to: 4832
The Macondo last revision - now I am satisfied, again

MacondoAcousticSystem.jpg


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-03-2008 Post does not mapped to Knowledge Tree
Markus
Posts 68
Joined on 03-07-2007

Post #: 43
Post ID: 7089
Reply to: 7082
It seems counterintuitive
 Romy the Cat wrote:

 Paul S wrote:
But doesn't putting the drivers on an inward-firing arc more or less shoot all the sound into a point, like the opposite of the Big Bang?

Paul, locating the horn channels on an inward-firing arc and targeting them to the listening point faces absolute prohibition from the perspectives of my Macondo's Axioms. The drivers in nearfield position should be positioned on curve but they must not be angled and shells keep the channels axis strictly parallel



Is the reasoning behind this on the site? I have done a search, but I couldn't find it.

Edit: okay, found it: http://goodsoundclub.com/GetPost.aspx?PostID=4475

Thanks.
04-03-2008 Post does not mapped to Knowledge Tree
be
Copenhagen, Denmark
Posts 86
Joined on 02-11-2007

Post #: 44
Post ID: 7090
Reply to: 7089
Idiom of Axioms
Romy wrote:

"Do not listen Romy, make you own very simple experiment and then make your own mind. Take two horn channels, low-pass and high-pas them at 6K for instance and drive them with 6K sinewave. When you time alight the driver you have well measurable gain. Any minute angling of axes of any of two drivers you will have change of the summarizing gain. Then set the driver with one having 1-2cm delay and begin to angel them. You will see that aliment will be changing and you will be able to changing the delay and angel to find the look-like perfect time alignment. However, here what the GOTO, Cessaro and the rest of the guys failed to admit: the angled aliment will work probably ONLY for a VERY specific listening distance. The parallel horns however do not care about listening distance. BTW, the effect is audible at HF and for bass horn that do not go very high the “parallel axis paranoia” might be neglected."


The time alignment will depend on the geometrics of horn set up and listening position, in the same manner, no matter if the horns are tilted or not.
It is simple: delay=(distance of ear to source)/(speed of sound)

I dont see why non tilting should have any advantage over tilting.
Actually if one is so close to the horns that one or more of the the throats get obscured from vision by the inside of the horn walls, then the necesarry bending of the sound path will increase the changes of delays, when one is moving around.

I think that Romys preference for non tilting lies in, that by not tilting the horns, the directivity, beaming or on axsis frequency iregularities are avoided, simply by pointing them where they dont do so much harm, below or abow the ears.

04-03-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 45
Post ID: 7092
Reply to: 7090
The Macondo’s Axioms and the Tilting Excursion

Since the “no tilting rule” is one of the Macondo’s Axioms: (#2 - “All channels shell have strictly parallel axis”) then I would like to defend it.

 be wrote:
The time alignment will depend on the geometrics of horn set up and listening position, in the same manner, no matter if the horns are tilted or not.
It is simple: delay=(distance of ear to source)/(speed of sound)

It is just logically appears this way but unfortunately it is not so in reality. I do not know well theories behind all of it – my understanding and knowledge has more applied, practitioner outlook to those things – so I declared the harm of tilting as a practical fact but I do not explain the physical nature of this phenomena – I just do not know it. Interestingly I even never asked myself about the underlying reasons. I admit it would be interesting if somebody explain why tilting screw up arrival time but I am too pragmatic to dig in it myself.

 be wrote:
I dont see why non tilting should have any advantage over tilting.

Ok, let me to explain. Take MF and HF drivers, position them strictly parallel and perfectly align them from 5 feet and listening position directly on the axis between the drivers.  In this case the driver’s cones will be strictly perpendicular to the main axis and equidistant from the listening position.  Now tilt one of the drivers for 1 degree and recheck the alignment from the same from 5 feet - you will be off. Now re-align the non-parallel drivers again. After you hit the alignment you will see that the equal proximity between the listening position to the driver do not exist anymore and the tilted driver will be in time-aligned setting closer or further then the non-tilted. Let call this tiny change of alignment distance with tilted drivers as the Tilting Excursion

Here is where the whole notion of drivers tilting hits the fan: the changing of listening position distance will demand a different Tilting Excursion. With the parallel drivers the Tilting Excursion juts do not exist. 3 feet, 5 feet, 10 feet – all the same: (distance)/(speed of sound). With the tilted channel you need to introduce a correction – the Tilting Excursion -depending of the listening distance.

The only know to me way to correct the thing is to wear some kind of detector on the listener that will read the distance to the driver and dynamically tilt one of the drivers contingent upon what the listening distance is. One would say: “Well, how about if the listening distance is very firmly set?” Then it should be fine, though I would have my concerns with the alignment at one octave above and before the crossover point in this case and I fell it might be the problem.

Take any loudspeaker with tilted baffle for done tweeters: Grand Slamm, Utopia and so on and take a look how dramatically HF sound changes with them whiles you move closer and further from them. BTW, GOTO officially “do not believe in time alignment” but they recommend tilting the drivers “until you get better sound”. Now you understand what kind BS they propose. BTW, if you have 2 channels with one cone plus 5 degree off the perpendicularity to the main axis and with another cone minus 5 degree off the perpendicularity to the main axis and the channel are time-aligned. Then you will have a perfect listening position no deeper then 1-2mm and you can very much listen in this case in a dentist char. As soon your hear move 1mm off then it will sound like somebody just put a ton of new Black Gates capacitors in your amplifiers….  if you know what I mean. :-)

 be wrote:
Actually if one is so close to the horns that one or more of the the throats get obscured from vision by the inside of the horn walls, then the necesarry bending of the sound path will increase the changes of delays, when one is moving around.

I think the diffraction has nothing to do with it as the effect is clearly observable even with the direct radiator dome tweeters.

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-03-2008 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 46
Post ID: 7093
Reply to: 7077
Angled down: Preliminary findings: Etc

I.M. Distortion wrote :
      "...#1 from were you listen to system from you should be able to look down the throat of every horn in your system..."

jd wrote : 
      "...Hmmm... I will soon be able to verify this for myself..."


OK, I said soon... Last night I got home and tried angling the horns down toward my listening point.

For those who don’t know, I have made a horn system patterned after Romy’s Macondos. More on that and the differences between the two systems at end of post.

First I should say that the frames which will locate the horns are almost ready. In the mean time, I use a pair of modular metal racks, which I have adjusted for time alignment (not to within .001 of an inch, but as close as is reasonable knowing its temporary). The horns are normally all firing along parallel axes, straight out perpendicular to the rear wall.

So last night I angled the upper horns of right channel down toward listening point, and left the left channel with horns firing along parallel axes. The preamp I use has left and right volume controls, making it easy to listen to one channel at a time. I played a variety of music, trying to stick with mono recordings as much as possible while listining to only one channel.

Here are my preliminary observations listening to the right channel with upper horns angled down, as compared to the left channel with horns firing parallel :

Upper horns angled down (upper horns means 180 Hz fundamentals horn and the tweeter horn) :

1) « Tighter » sound when instrument plays a single note, I would say it was more in focus, but possibly less vibrant.
 
2) Possibly subjectively quieter (want to use one more click on the volume knob… a good sign I guess)

3) Flatter sound (as in less 3D space)

I thought it sounded good enough to take the time to angle the left channel down as well ; its sort of dangerous work due to the weight involved, but I wanted to hear it.

Both channels with upper horns angled down :

1) Game over in 3 seconds… Forget it… The space this system used to depict so fantastically had now gone completely FLATTTTTTTTT.

2) Notes sounded slightly dead and muffled by comparison (reminded me of the very nice box speakers I used to own)

3) Over all less captivating and less involving

This actually scared me ; what if I somehow couldn’t get the magic back (who knows man, maybe I had unknowingly hit the dPols jackpot ?). I put the horns back to parallel alignment, and happily the magic returned.

The new frames will make it far easier and safer to conduct this experiment again, and I will do it just to confirm these results.

I should add that had I never heard the system in its normal parallel firing configuration, I would have probably been impressed by the sound with horns angled down… It did still sound quite good, and I could have been fooled, I am after all an absolute beginner.

About getting this system up and running :

Since moving everything into a room that’s large enough, and putting the upper bass horns into the game, I just sit there in awe. The first night I was literally on my ass in amazement. I told myself no way is this possible… Such warm delicate detial is now filling the space, and what space! Really, I was quite certain that I was just too tired and was imagining this sound. The next night I told myself no way; must have some freaky good electricity here tonight… I gotta get some sleep ! Two weeks later and I am still on my ass. My life has come to a screeching halt. I don’t get anything done… Don’t ever get to sleep before 3 a.m. Don’t leave the house other than for work ; have been pulling on dirty clothes because I just can’t stand the thought of hearing the washing machine in the background… I am quite sure I will forever be single and I just don't care.

Romy you may take this all as a compliment.

Main differences between Romy’s Macondos and my horns, or where I would take the Macondos :

I use a larger top or "fundamentals" horn (180 Hz cut off vs Macondo’s 250 Hz),  which I do not attenuate at all. Consequently, the upper mid range horn (400 Hz ; same as Romy’s) is high-passed electronically at a higher point (4800 Hz 1st order), and the upper bass horn is not asked to play so high.

Relieving the small (400 Hz) horn of some lower frequenqies allows use of the original metal-suspended diaphragms in all four S2s.

I don’t use an injection channel ; My mind could be changed, but I do feel that I get the very nice tone via the above-mentioned diaphragms along with the drivers I use in the upper bass horns (115 Hz cut off ; same as Romy’s) : Old paper cone drivers with big AlNiCo magnets.

For tweeters I use (and love) the Electrovoice T350, which I high-pass at 12 KHz 1st order (well ok, I love one of the two pairs I have… For whatever reason, the other pair is not in the same league). I have zero motivation to try other tweeters.

This system still lacks true dedicated mid-bass horns (pair of 45 Hz straight bass horns "coming soon"), but the upper bass driver goes really low before rolling off, and I do let it go there for now. Also I use a pair of extreme low frequency enclosures, which I currently allow to run up to 90Hz 1st order, so a bit higher than will be the case once the mid-bass horns are done. Romy does have true mid bass (via a pair of line arrays).

The lower bass enclosures are responsible for a lot of the magic (pair of 16 cu ft sealed boxes), and they are very much a part of the system. The drivers have a really easy life… The cones don’t seem to move at all ; but switch them off to hear what they’ve been doing. It doesn’t matter what the music, at the very least they will tell you a lot about the recording space.

I don’t have a pair of Melquaid DSETs. I drive the horns with a pair of Lamm ML2s, running full range. I use a second pair of M1.1s for lower bass. The ML2s are hard to fault. In fact at this point, I can only find positive things to say about them. When I finally identify a good reason (sonic) to do it, I will try building a pair of DSETs… If the 45 Hz horns don’t kill me first.

Jd*




How to short-circuit evolution: Enshrine mediocrity.
04-03-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 47
Post ID: 7094
Reply to: 7093
You need to EQ the dBs of the angled horn
 jessie.dazzle wrote:
So last night I angled the upper horns of right channel down toward listening point, and left the left channel with horns firing along parallel axes.
Jessie, do not forget that if you made the dramatic-enough angling then in order to preserve methodological purity of experiment you need to attenuate slightly the angled horn and it will most likely output more dBs to a listener located on axis of the angled horn.

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-03-2008 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 48
Post ID: 7096
Reply to: 7094
Angle/gain relation
Romy wrote :

"...do not forget that if you made the dramatic-enough angling then in order to preserve methodological purity of experiment you need to attenuate slightly the angled horn and it will most likely output more dBs to a listener located on axis of the angled horn..."


Yes, this is what I would have expected, but if you reread my post, you will see that in fact the opposite seemed to have been the case... That is to say with horns angled down I had a tendency to want to use a higher volume setting.

And yes, the angle of the upper horn was quite steep... Because of the nature of the support, the horn is currently sitting up a little higher than is the case with your frame; I listen from about 12 feet back (measured from mouth of upper bass horn).


How to short-circuit evolution: Enshrine mediocrity.
04-03-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 49
Post ID: 7097
Reply to: 7096
The dimension of the “click zone”.
Jessie, do not forget also while you do your alignment experiments to listen the system from different distance. Get a reference whatever it is and then make a step back and a step forward. Try to discard the upperbass changes and pay attention only to the frequencies that you are trying to align. In tour care it should be easers then in mine as you use T350 driver that has the same output dropping progression as your other channels. You might eventually found a distance from where the “angled sound” will suddenly “click”. It might not be the distance what you would like to sit. With the parallel horn’s axises the “click zone” will be way larger. I personally tend to recognize that with parallel horns the imaging still better then with the tilted horns and a listener located in the “click zone”.


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-03-2008 Post does not mapped to Knowledge Tree
be
Copenhagen, Denmark
Posts 86
Joined on 02-11-2007

Post #: 50
Post ID: 7101
Reply to: 7093
???
So the principle only works when listening in stereo?
That sounds even more mysterious.
I am not into imposing but maybe there is an explonation in what I said previously:
"I think that Romys preference for non tilting lies in, that by not tilting the horns, the directivity, beaming or on axsis frequency iregularities are avoided, simply by pointing them where they dont do so much harm, below or abow the ears."
It would be nice to know what is going on.
Unfortunatly the number of channels and crossover fequencies I have at the moment dont permit me to try.


04-04-2008 Post does not mapped to Knowledge Tree
jessie.dazzle


Paris, France
Posts 456
Joined on 04-23-2006

Post #: 51
Post ID: 7105
Reply to: 7097
Click zone & Cring factor

Romy wrote :

"...do not forget also while you do your alignment experiments to listen the system from different distance. Get a reference whatever it is and then make a step back and a step forward... You might eventually found a distance from where the "angled sound" will suddenly "click"..."

To help establish the best listening point in the new place, I decided to use an office type chair with wheels (its also nice to slide up to the equipment rack without having to get up!). When doing the tilted horn experiment I did try moving toward and away from the horns.

"...Try to discard the upperbass changes and pay attention only to the frequencies that you are trying to align..."

Yes, I started off listening to music with a lot of violin and cello for exactly that reason, but then realized that because my fundamentals channel goes quite low (700 Hz 1st order), is not attenuated, and was the most steeply tilted, I was curious to know what was going on around the crossover point between this horn and the upper bass... So I started paying attention to that crossover point as well; though I realize that it is less critical.

"...With the parallel horn’s axises the "click zone" will be way larger. I personally tend to recognize that with parallel horns the imaging still better then with the tilted horns and a listener located in the "click zone"..."

Loss of imaging was by far the most noticeable effect with horns tilted. This loss may be more pronounced in my case because I started off with such strong imaging. This capacity for imaging (with horns parallel) may be due to the fact that the top of the upper horn is positioned about 2 ft below the ceiling, which is higher than normal and opens toward the listener (not parallel to the floor). So the stack of horns, with the upper bass horn on the floor and MF + HF in between, is sort of like a line array.

be wrote :

"...I think that Romys preference for non tilting lies in, that by not tilting the horns, the directivity, beaming or on axsis frequency iregularities are avoided, simply by pointing them where they dont do so much harm, below or above the ears..."

A lot of horn users seem to have these issues. I have not heard any other systems using Vitavox S2 drivers, but I know it is possible to get the S2 to generate on-axis unpleasentries. In the case of the system I am building, one can happily sit straight in the firing axis of any of the horns without experiencing the above-mentioned unpleasantries... No cringing. The reason for this I believe is directly related to the fact that I'm not asking each horn to cover such a wide frequency range. In other words, there is a lot of "horn margin" on either side of the frequency range being produced... Which probably looks like a high percentage of wasted horn to some.

jd*



How to short-circuit evolution: Enshrine mediocrity.
04-04-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 52
Post ID: 7106
Reply to: 7105
The low-passing S2 driver.

 jessie.dazzle wrote:
I have not heard any other systems using Vitavox S2 drivers, but I know it is possible to get the S2 to generate on-axis unpleasentries. In the case of the system I am building, one can happily sit straight in the firing axis of any of the horns without experiencing the above-mentioned unpleasantries... No cringing. The reason for this I believe is directly related to the fact that I'm not asking each horn to cover such a wide frequency range. In other words, there is a lot of "horn margin" on either side of the frequency range being produced... Which probably looks like a high percentage of wasted horn to some.

Hm… it is would be debatable.  S2 on-axis might be brutal, particularly with originals metal cones and one of the ways to deal with the brutal is using various low-pass filters or transient filters. Turning the horn slightly off-axis, using deeper horns and some other methods are low-pass filters. Loading the out tube harder probably is the most effective transient filter. The S2 is very much sensitive to quality of electricity. Since you are at 12 feet, sine you use the 16R tap on ML2.0 I think you might go away with on-axis shooting. I personally prefer to load the ML2’s output tube slightly idler (8R top) and to turn point the horns to my shoulders instead of my ears.

Interning that right now another guy that I know juts finish building his multi-way installation with S2 driver and upperbass horn. It took for him a year and he feels that the efforts were justified. He drives the S2 with 3uF cap and he looks like low-passing the S2 by turning. Anyhow, turning the horn is more to do with imaging of the whole installation then with balancing of the S2 driver. With S2 is a very lucky case as the bester imaging for the system AND the best low-pass roll-off might be at the same angle.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-04-2008 Post does not mapped to Knowledge Tree
be
Copenhagen, Denmark
Posts 86
Joined on 02-11-2007

Post #: 53
Post ID: 7107
Reply to: 7105
The advantage of not listening on axsis.
The most spacious sound I have heard was from a Lowther in a audiovector cabinet, here there is no direct sound at all since the driver fires straight upwards in a front horn for the mid/high and get reflected from the back wall and the ceiling.
The Lowther shriek was completely gone also!
The sound was appart from the weak bottom very very enjoyable, especially with symphonic music.
It sounded completely defocused like in a concert hall far away from the orchestra.
Maybe the lack of tilting in multiway systems produce some of the same effect?
04-04-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 54
Post ID: 7108
Reply to: 7107
Photographic Chromatic Aberrations and horns/sound

Be,

I do not think that effect you describe has anything to do with demand of horns have strictly parallel axis. I also came across to some situations where the extremely indirect sound was superbly interesting but it is I feel is very different subject and has very different underlying reasons.

My presumption is that with non-parallel case the different frequencies get time-aligned at different distances, something to what we in photography (my first trade) was called chromatic aberration. If you look at the nature of chromatic aberration in optical system then you will see a perfect model why the unparallel horns do not sound right. If you have a lens and hold it’s axis on the line of infinitely located light source then you have one level of chromatic aberrations. If you then angle the lend 5 degree  for instance  then you will have the very same focusing but the amount of chromatic aberrations will avalanche.

I do not insist that it is right explanation but it does it to me. After all - they are my Axioms… :-)

The caT


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-04-2008 Post does not mapped to Knowledge Tree
be
Copenhagen, Denmark
Posts 86
Joined on 02-11-2007

Post #: 55
Post ID: 7109
Reply to: 7108
Hi!
"I do not think that effect you describe has anything to do with demand of horns have strictly parallel axis. I also came across to some situations where the extremely indirect sound was superbly interesting but it is I feel is very different subject and has very different underlying reasons."

Maybe.

"My presumption is that with non-parallel case the different frequencies get time-aligned at different distances, something to what we in photography (my first trade) was called chromatic aberration."

This is wrong.

Chromatic aberration in lenses is caused by that the speed of light changes as a function of the frequency
(colour) of the light in the glas. This is called dispersion.
In case of sound propagation of sound in air, there is no dispersion, this means the speed of sound is the same for all frequencies.
There is no analogy to chromatic aberration in acoustics of air.

Regards
04-04-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 56
Post ID: 7110
Reply to: 7109
Sound and light are VERY much the same.

 be wrote:
There is no analogy to chromatic aberration in acoustics of air.

Disagree. Regardless the reason for Chromatic Aberration in context of the given illustration we care ONLY about the arrival time. In case of lens we have the discrepancy of arrival time as a deviation of focusing distance. In case of speakers we pay the penalties of misalignment. Do not forget that when we are talking about crossover aliment we are talking about the arrival of a single wave at the middle of the cut off. Let say that we have 10K cut off and use 10K sinus.  What would happen what we use 7K signal or 13K signal? In case of parallel horns we have no discrepancies and 7K, 10K and 13K will require the same alignment. However, with none- parallel horns you can get a perfect alignment only for a single frequency. In the case of Chromatic Aberration it will be the alignment for a single distance. The speed, distance and time are the very same subjects and in that I see a lot of similarities between optics and sound. With all that said I would like to remind that the “Chromatic Aberration Syndrome” as an explanation for sonic problem of non-parallel horns is juts my working hypnosis. I do not insist that it is so. As I said before I have no definitive enlightenment about the true reasons. The subjective evaluations that I did 7 year ago did indicate that the non-parallel horns are a big taboo. I never care seriously look deeper into the reasons. I feel that Chromatic Aberration is adequate enough explanation to satisfy my interest on the subject.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-04-2008 Post does not mapped to Knowledge Tree
be
Copenhagen, Denmark
Posts 86
Joined on 02-11-2007

Post #: 57
Post ID: 7112
Reply to: 7110
The sound of lenses?
I suspect that your negative views about on axis listening due to sensitivity to listening position must be to some narrow angle on axis frequency anomaly of the driver/horns you tried.

If you insist to use chromatic aberration as a working hypnosis!! in this context, it would have to be due to differences in frequency response of the horns in different directions, frequency responce deviations will effect phase response and thereby group delay, just as a crossover network.
But the tilted horn has no inherent disadvantage in this respect, if you dont like the frequency responce you can alter this with the crossover.

be
04-04-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 58
Post ID: 7114
Reply to: 7112
I insist nothing, they are my axioms after all.

 be wrote:
I suspect that your negative views about on axis listening due to sensitivity to listening position must be to some narrow angle on axis frequency anomaly of the driver/horns you tried.

I do not think so. Pay attention I did not bring any subjective arguments to defend my pro-parallel axis portion. If you experiment with aliment yourself and play with horn tilting during aliment then you might discover some aliment inconsistencies. To keep the horns parallel is about do not have those inconsistencies. How it affects sound? I could propose any theories or to refer to my listening experience but in order you and others agree or acknowledge it we need to sit in the same room and listening the same playback. Since it does not happen I did proposed the easy way to objectively confirm the problems with horn tilting. The only contra-argument that I would consider if somebody would align the channels and then by tilting one of the channels will NOT observe the introduction of mis-alignment.

 be wrote:
If you insist to use chromatic aberration as a working hypnosis!!

Oh, no, I do not INSIST to use chromatic aberration as a working hypnosis. It is the explanation to myelsef with which has settled. If you of anybody else would offer something more lucid then I would be glad to contemplate it.

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
04-04-2008 Post does not mapped to Knowledge Tree
be
Copenhagen, Denmark
Posts 86
Joined on 02-11-2007

Post #: 59
Post ID: 7115
Reply to: 7114
Try this
"To keep the horns parallel is about do not have those inconsistencies."

I sugest that those inconsistencies ar due to on axis frequency anomalities of the used horns.
Elimminate these, and the inconsistecies will vannish, and the concerned axiom wil be void.

Maybe the axiom should be changed to:

"Since most horns have frequency response
problems, at and nearby their axsis, it is advisable to excert caution by angeling them in the vertical plane straight at the listening position."

The question remains though: Does there exist horns, that does not have the problem that you have observed?

be
04-04-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 60
Post ID: 7116
Reply to: 7115
Well, my problem is that I did try it.
 be wrote:
I sugest that those inconsistencies ar due to on axis frequency anomalities of the used horns. Elimminate these, and the inconsistecies will vannish, and the concerned axiom wil be void.
The effect that descried was observed by myself within my horns that have “on axis frequency abnormalities”, within the horns that do not have “on axis frequency abnormalities”, with the drivers with at 120 degree radiation pattern and even with the raw cone drivers. What I say is based upon what I have seen and done. May I ask you: what is your agenda to argue this subject? It is perfectly admissible do not agree with a specific or with the all Macondo Axioms, you do not see me trying to convince others or impose the Axioms to others. However, if you propose that my Axiom about the parallel axis is faulty then you have to your experience on the subject or at least tell why you feel the Axiom is flawed. I have been playing with this subject since winter of 2000 when I first tilted the AG Duo MF horn. Since then I listen and measured a large amount of horns, learning how tilting, timing, narrowing of bandwidth and other aspects impact the subjects listening sensations. I feel that I do have some grounds to propose what I am proposing in my Macondo Axioms. In contrary when I proposed you to make a simple experiment yourself with aliment and tilting you told that “Unfortunately the number of channels and crossover frequencies I have at the moment don’t permit me to try.” Be, I am not trying to discredit you but if you degree without ever trying to get any own views on the subject then you need to look into your own motivations. Anyhow, I prose to live it “as is” and return to it after you play with tilting yourself and found YOUR OWN ways to assess the results. For a time being you do not pay a lot for reading the Macondo Axioms and you should not ask for refund :-) Still, in my inflated view I feel that in the Macondo Axiom there are much much more depth and wisdom that you might feel now....
 be wrote:
"Since most horns have frequency response problems, at and nearby their axsis, it is advisable
BE, may I ask you what “frequency response problems nearby horns axis” are you talking about and even if you discover some then what is has to do with an anything?


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
Page 3 of 7 (121 items) Select Pages:  « 1 2 3 4 5 » ... Last »
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  Romy's Horns..  RE: Still Romy's horns...  Horn-Loaded Speakers Forum     3  61835  04-14-2005
  »  New  The “Dead Points of Live Sound”..  Confused...  Playback Listening  Forum     28  312800  05-14-2005
  »  New  Macondo Horns: biography...  Macondo with Pussy Eyes....  Horn-Loaded Speakers Forum     2  61029  05-18-2005
  »  New  The IDEAL horn system..  Serious Coax? Where?...  Horn-Loaded Speakers Forum     27  184015  12-11-2005
  »  New  Adding one more spherical to Macondo...  It is about magnet and SS type....  Horn-Loaded Speakers Forum     92  926582  05-23-2006
  »  New  45Hz Bass Horn..  Can We Ever be Saved From Ourselves?...  Horn-Loaded Speakers Forum     23  306283  09-19-2006
  »  New  The most promising “best” commercial speaker..  Munich High End 2023...  Horn-Loaded Speakers Forum     192  1734844  12-06-2006
  »  New  Macondo Frame modification...  Parquet...  Horn-Loaded Speakers Forum     46  445962  12-22-2006
  »  New  RAAL “Water Drop” tweeter for Macondo...  Your comment takes me by surprise...  Horn-Loaded Speakers Forum     77  893542  02-16-2007
  »  New  How to USE “Resonating Oops” in loudspeakers..  Injection?...  Horn-Loaded Speakers Forum     184  1470052  02-28-2007
  »  New  Jessie Dazzle Project..  Will this better to be auditable?...  Horn-Loaded Speakers Forum     172  1509199  08-03-2007
  »  New  Proximity of horn’s crossover and it’s ability to care ..  Does this explain or relate to the "trombone"...  Horn-Loaded Speakers Forum     2  35680  09-16-2007
  »  New  Stop having a fear of horn vignetteing..  Eclipsing the feathery edge...  Horn-Loaded Speakers Forum     1  26637  12-14-2007
  »  New  My (Amplification + Acoustic System): what is next?..  Macondo and Melquiades in the NEW room....  Audio Discussions  Forum     41  301269  01-10-2008
  »  New  Make your own horns?..  I have no wet dreams about horns…...  Horn-Loaded Speakers Forum     1  27310  01-22-2008
  »  New  All Active! A DSET and multi-way acoustic system...  Hahaha...  Audio Discussions  Forum     14  119621  01-31-2008
  »  New  Who makes horns? Architectural options...  Who makes horns? Architectural options....  Horn-Loaded Speakers Forum     0  18932  02-29-2008
  »  New  Macondo vs. the “industry sponsored speakers”..  Correction : "Man in the street"...  Horn-Loaded Speakers Forum     4  57317  05-11-2008
  »  New  Experience Music Horn Installation @ VSAC..  RCA MI-1428B vs Vitavox S2...  Horn-Loaded Speakers Forum     25  266089  05-27-2008
  »  New  ... again on GOTO Unit drivers.....  GOTO installation in Lithuania....  Horn-Loaded Speakers Forum     108  1101355  08-16-2008
  »  New  Compression Drivers -in general..  Do the things progressively…...  Horn-Loaded Speakers Forum     25  229036  10-19-2008
  »  New  The state of High-Efficiency Loudspeakers...  Tom Danley’s brilliant law...  Horn-Loaded Speakers Forum     6  87672  02-25-2009
  »  New  Macondo listening experience..  Actually I disagree with your assessment....  Playback Listening  Forum     4  53331  06-16-2009
  »  New  Battling stupid Horn Criticism as a concept..  Some Brit’s take on the Horn sound.......  Horn-Loaded Speakers Forum     32  209777  08-03-2009
  »  New  MacondoLite..  The Count Alessandro di Cagliostro’s methods....  Horn-Loaded Speakers Forum     18  178519  08-15-2009
  »  New  How to select mid/upper bass horn drivers...  How to select mid/upper bass horn drivers....  Horn-Loaded Speakers Forum     0  24716  08-25-2009
  »  New  Engaging the David Haigner’s ideas..  The degree of disagreement correction...  Horn-Loaded Speakers Forum     7  84940  08-30-2009
  »  New  Tightening to loosening Screws ? no fake.....  Screws are BACK again...  Playback Listening  Forum     13  102286  10-16-2009
  »  New  Meyer X-10..  Here is another example …...  Horn-Loaded Speakers Forum     3  52697  10-28-2009
  »  New  Many Mani's options: My first horns..  Well, you need to read a whole book....  Horn-Loaded Speakers Forum     27  145019  01-20-2010
  »  New  New speaker system..  One more horn speaker system to look at...  Horn-Loaded Speakers Forum     6  88917  03-16-2010
  »  New  Time alignment of drivers..  Capacitors...  Horn-Loaded Speakers Forum     16  132091  08-17-2010
  »  New  Macondo’s lowest channel...  What truly are you tryin to accomplish?...  Horn-Loaded Speakers Forum     150  1343826  09-15-2010
  »  New  About HF Binaurallism..  What is going on now....  Playback Listening  Forum     1  24364  11-27-2010
  »  New  Basic guide to advanced audio..  The 3-legged (running) Dog of GSC Hi-Fi...  Playback Listening  Forum     62  519086  07-23-2011
  »  New  Rakeshorns..  Excellent walls....  Horn-Loaded Speakers Forum     33  286459  08-26-2011
  »  New  Canadian Speaker Proposal..  Drivers/Speakers As Filters...  Horn-Loaded Speakers Forum     56  338357  06-21-2013
  »  New  Deep End DIY - Australian take one Macondo...  It is simple, but......  Horn-Loaded Speakers Forum     87  289183  01-20-2016
  »  New  Remedies the Beauty..  Supertweeter...  Playback Listening  Forum     293  205112  10-13-2021
  »  New  Macondo 2.0?..  Confused!...  Horn-Loaded Speakers Forum     24  14826  11-18-2022
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts