|
fiogf49gjkf0d
Romy, I use MDF primarily, plywood occasionally and solid wood if I am forced to.
Round horns are precision CNC made within +/- 50 microns.
However, during sanding and finishing process the accuracy is somewhat spoiled.
The final accuracy is +0.05 / -0.5 mm, for smaller horns even better.
Rectangular bass horns are somewhere between +1/-1 mm.
I believe that, I have never actually measured the accuracy :-)
some of the prices:
Kraken 100hz le cleac'h rectangular for two 8" drivers, throat driver dependent
raw MDF 600 euro pair
veneered and painted 1000 euro
Kraken 33hz spiral hypex horn t=0.7 for 10" driver, throat driver dependent, length 280cm, mouth 2645 cm2
raw MDF 1500 euro pair, that is for one channel
veneered and painted 2500 euro
round tractrix 1"throat MDF sanded and base paint coated
180Hz - 900e
200 - 700e
250 - 500e
400 - 250e
550 - 180e
round le cleac'h T=0.7 1"throat MDF sanded and base paint coated
180Hz - 2000e
200 - 1800e
250 - 1200e
400 - 600e
550 - 400e
or any other horn expansion
plus packaging and shipping
I am opening a new cabinetry division abroad. I don't know if I am going to be able to produce any of the loudspeakers in the next couple of months,
but i am willing to talk about it, very much.
dr.
|