|
Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
|
|
|
wow.thanks for comments.La Grande Castine will not be as expensive as Cessaro Gamma.i am sorry but i cannot answer to all questions, for several reasons you can understand.we have tested many drivers since the early prototype of La Grande Castine. BM...
|
Some folks from Australian audio site nominated my Macondo as the ugliest loudspeaker. I would disagree but my objective in this thread is not arguing about tastes but to talk a bit about reference points of judgments. It is irrelevant to me per...
|
I'm sure you've probably seen this before, but here is another example of shoe horning a large horn into a room.
Discussion of this approach can be found here: http://www.diyaudio.com/forums/multi-way/140190-jean-michel-le...
|
[quote user="Morfeas"] Fs of the driver is measured at 32HZ matched for both channels. [/quote] Manolis, if you have 32HZ of loaded driver resonance and a large throat in such a short horn then I would propose that you have your 50HZ not from the loa...
|
Jessie-Good to hear from you. I am very motivated following your progress. Thanks for the inspiration.My room size is around 15' x 18' x 8'. At this point, I feel that a proper 60 - 70hz midbass horn is physically the largest I am realistically pr...
|
MoreartDouble-driver "back horns"? I am not sure what you are asking about, or what exactly you are promoting, but I do not agree with lightweight, square-section horns, because I have never heard one that worked, apart from shifting certain frequen...
|
[quote user="jessie.dazzle"] What really surprised me was how good everything sounded with no filter on the upper-bass horns, and all drivers connected to the same (8 Ohm) tap; sure I'm getting too much mid-range from the upper-bass horn, but its...
|
Hi Romy,If you have a moment between setting up your gear in new room, can you point me to the thread where you discuss suggested wood horn finishing techniques? I can't find it.I am hopefully on verge of placing order for my first mid-bass horn for ...
|
Hello,i made a new constructiondown to ~34 Hzfor 3", 5", 6,5" and 8"bass driver,15 cm flat behind the flat screenor two with 100x120x15 cm,or sideboard forsat placement.the 17 inside widthwould be a best solution with the TB W6-1916.the 23 cm inside ...
|
Here I would like to share some basic ideas about the skeleton of the horn. This is just a view from 50.000 feet but it will give some illustration what is brewing in my mind.
The one side of the triangular horn will be flat and will sit at le...
|
[quote user="Romy the Cat"]The view is from the mouth of the right horn.[/quote]Here is the way how the horn will be mounted between the top and bottom beams and along with rafters. What is very kinky in here is that the curved space between two roo...
|
I have built quite a few bass horns and found any thing over 1/2 inch ply wood reinforced is all you need, in front of your baffle. If you had ever built a few on your own and had the right equipment to test you would realize this, but when your a ha...
|
[quote user="Romy the Cat"]
...this interesting point has no practical answer. First of all in the case of Rakesh horn what N-Set proposed is not necessary. Those 115Hz Hasqiun-style horns that Rakesh emulates are well dumped with own mass and own ...
|
Hi everyone,It is quite ironic that the day I hear from Fane telling me that the Fane 8Ms are finally ready, I should receive this update from my horn maker maestro. Russ Collinson of Layers of Beauty. Russ, if you ever read this here, please take a ...
|
This is a complex topic to setup a multi-horn system. What do you expect that something like this will come in a step-by-step instruction? It is years of effort to get it right. The discussion that we have here is wrong horn pair up with driver an...
|
The idea of trapped horn looks like get very popular among audio people. I have no position on the subject and I do not know if trapped horn is able to facilitate proper sound and if it drastically different from the sound of operated enclosures. I n...
|
The bottom eaters from AA raised an interesting subject:
http://www.audioasylum.com/forums/hug/messages/16/160276.html
... and of cause covered it within the scope of own fears and limitations. I particularly like their idiotic ...
|
Thanks, Robin I do not drink and the wine/beer cultural cult is a bit above me. I still do appreciate however a good moldy and decadent décor of wine cellar but unfortunately it would be very different for the style of the listening room that I am ha...
|
Thanks, decoud. My desire to make my own hand dirty with this project doe not exceeds my desire to have a new Injecting Channel enclosure. I would like to find somebody who would take my money and built for me exactly what I will spec....
|
Paul,I have not heard the synergy horn or any speaker with that design. Here is what I am talking about:http://www.yorkville.com/images/products/u15_cut_sm.jpgIn this particular case there are 3 mids and 1 tweeter driver sharing the same horn.This so...
|
[quote user="noviygera"] I am NOT talking about single wideband drivers or any back loaded type horns. I am talking about properly made front loaded horns. For example, the Danley Synergy horns, that use single horn with multiple drivers to cover a w...
|
Sitting here enjoying a Miller Genuine Draft (with slice of lemon!).
Today, spent a lazy 2 hours building the new 30Hz Tapped Horn sub. Oh so easy. All panels pre-cut by supplier...just drew them up, glued and clamped. Tomorrow I'l...
|
Finished, and very impressed with the output of this small tapped horn.
Running simple RCA piggy backs from valve amp output to plate amp, which is Digitech (JayCar), 100-watt. simple enough, nothing fancy. Would like to integrate the ...
|
Brass instruments function much differently than audio horns. First of all they are built extremely resonant by mismatching length and horn taper. The taper of the bell is there not for horn type efficiency, rather to change the acoustical length of ...
|
This is a very important question as since very beginning of the projects it was questionable if I would be able to get away with the back/top firing position of my midbass horn. So, as now, when the midbass horn project is over and horns fully i...
|
In Poland we have another young company which one start to build horns. On this moment they have only one model- 420hz tractrix, in near futhure there will by 150 hz. but they can build whatever You want in 3 weeks period. This 420hz is homogeneous r...
|
Hi Jessie:It is indeed a (t)horny dilemna whether to get rid of the midbass horns now, with a view to starting all over again and customise the new horns for your eventual new home in Detroit or ship them at unfortunately what will be a very substant...
|
It kind of said the Massachusetts is very much not “horny” state and there is not a lot of enthusiasts of horn loading live in Massachusetts or in the entire New England. If we New Englanders have the saturation of horn interest as high as California...
|
[quote user="Romy the Cat"]Tax,
do not go over yourself with “building paranoia”, looking for drivers, horns, boxes and etc. If you are looking for 80Hz to 200Hz range (you will need higher upper knee for AG Dou) then you do not need a bass d...
|
If you are going to do something like this then it would make sense to have it firing backwards & make use of the corner of the room in the way Carfrae did some 15 years ago.[IMG]http://i75.photobucket.com/albums/i318/murrayjohnson/big-horn.jpg[/...
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
Last 24-hours posts: |
0 |
|
|
|
Total human visitors: |
43,091,755 |
|
|
|
|
|
|