Rerurn to Romy the Cat's Site
In the Forum: Melquiades Amplifier
In the Thread: Single-stage Melquiades vs. DHT amps
Post Subject: Gain to losePosted by floobydust on: 2/24/2009
fiogf49gjkf0d
Romy,
As you pointed out, if the input circuitry and driver operating points are fixed, your only options are to lose it via coupling or the output stage. Maybe split them, i.e. use a 1:0.5 ratio on the inter-stage transformer and you could lose 6dB there. The rest you could lose at the output stage by using a L-pad to dial-in your preferred matching level and then replace it a couple fixed resistors.
Regards, KM
Rerurn to Romy the Cat's Site