Rerurn to Romy the Cat's Site


In the Forum: Horn-Loaded Speakers
In the Thread: Macondo’s Midbass Project – the grown up time.
Post Subject: Why we pre-assemble the things.Posted by Romy the Cat on: 8/3/2010
fiogf49gjkf0d
 Paul S wrote:
Again, it may be parallax (or, it may be late...), but the following do not appear to me to be "smooth progressions", whether simple or exponential:

1) Section 2, vertically
2) Section 4, horizontally
3) Section 4, vertically

Of course I don't know what the thing is supposed to look like, in the first place, but this is where large, plotted paper (or cardboard) templates are useful as gauges. Maybe plot and gauge the inside of the curve, so differences would be easier to spot (if it matters...).


It's very easy to cross a line with a hand-held power saw, and a snapped line can be fairly wide (relatively speaking, here), to begin with. If this proves to be an issue, Japanese-type ink lines are quite narrow and visually sharp. If/when the line is critical, one can always "leave the line", then plane or sand back to it with a disk sander (experts only...), for greater control.

Nope, the sections 4 and 2 horizontally are fine – I did re-measure them. The section 2 vertically is subject of my thinking. The section 2 is not a continuation of the section 1, but rather a continuation of section 1’s insert (not done yet). I need to see an insert to assess what is going on. Again, this is why we pre-assemble the things: to be able to evaluate what we do.

The Cat

Rerurn to Romy the Cat's Site