Rerurn to Romy the Cat's Site

Audio For Dummies ™
Topic: Use stereo system to play mono...

Page 1 of 1 (3 items)


Posted by Romy the Cat on 07-30-2006

A horn loaded installation shell not be mono, period!

I have observed this phenomenon for years and I insist that it is impossible to make a properly performing horn-loaded playback. I have no explanation for it but I take it a rule:  the monophonic horn installations produce honk.

There are many different reasons for honk in horns: wrong horns, too low crossover points, and many others. They all perfectly deflectable if person know what he is doing but there is no remedy for mono honk in horns. Take ANY perfectly performing stereo horn installation and disconnect one channel. It would be irrelevant if you feed the active channel with right/left ingredient of the signal or with mixed signal or with a full mono signal, you ALWAYS get a degree of honk when you have a signal channel working. Activating another channel, even if you play mono from two channels will eliminate any presents of honk (if your horns did not have I to begin with).

So, say no to mono horn ideas: it is imposable to make them honk-free. At least I never ever was able to see any horn systems that did not honk with one channel, although I have seen/heard many that were honk-free in stereo version and then picked honk when they were used as single channels mono systems…

Rgs,
Romy the caT


Posted by Wojtek on 07-30-2006
So, what is the solution for a mono system? Also, I remmember that your mono experiments with field coild S2 produced honk .Should you use stereo drivers to get better results ? RGRDS. W

Posted by Romy the Cat on 07-30-2006
 Wojtek wrote:
So, what is the solution for a mono system? Also, I remmember that your mono experiments with field coild S2 produced honk .Should you use stereo drivers to get better results
Use stereo system to play mono, a properly make and phase coherent stereo inhalation should do mono very well. I know about the essential problems for playback to reproduce mono with two channels (combo distortions and so on…) but it looks like it has correlation with auditable experience only in context of direct radiators. As far as I have seen/heard the horn speakers produce MUCH more interesting sound if they do mono with both channels.

The Cat

Page 1 of 1 (3 items)