| Search | Login/Register
   Home » Playback Listening » “Harmonic Speed”- friend of foe? (7 posts, 1 page)
  Print Thread | 1st Post |  
Page 1 of 1 (7 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  About TTH characteristic in Audio..  As a process...  Playback Listening  Forum     1  25626  11-15-2007
01-31-2005 Post mapped to one branch of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 1
Post ID: 632
Reply to: 632
“Harmonic Speed”- friend of foe?

I am kind of semi-evaluating a power amplifier now and think about the following: there is a correct relation between harmonic content of amplifier and it’s dynamic aptitude.

I have heard many amplifiers that run across the dynamic range with a tremendous speed but the while they do so are loosing the “harmonic tails”. As the result, while they operate in transient they sharpen sound (and the Morons-audiophile love it, it is what the call resolution!) Probably the most flamboyant amp that does it would be Canadian Tenor OTL that keeps thrilling the audiofool intelligence. They, and the similar amps, combined with dull and “slow” speakers and playing essentially simple audiophile music mask out the screwee dissociation between own dynamic qualities and speed of it’s exchange, at least it hapends in the eye of an typical non-demanding audio beholder….

I can see some hard-core technical people coming and would suggest to analyze the distortion patters and to correlate between the input and output signals at the different volume levels. I do not find this approach being indicative and I have 2 reasons ( I learned it designing the loudspeakers). First, when I do so I get a static presentation of harmonic capacity. I do not really care about it and I more concern about the amp’s ability to maintain the acoustic-like harmonic stricture while it is in a move. Second, and this is sound kind of ridicules: I always, always-always, prefer the “fatter” harmonic, the larger the better.

Interesting that I came across to an observation that the acoustic-like harmonic constraint is NOT my reference while I try to assess the performance of audio. Rather I am searching for a “believable”, reasonable and justifiable balance between the MAXIMUM harmonic load and the speed of its exchange. Therefore within my own language I always recognize an expression  - “HARMONIC SPEED” which represents in my mind a subjective relation between a speed of sonic messages and this maximum harmonic content. The important thing in here the word “maximum” as I NEVER heard any EXCESSIVE harmonic content from audio but rather I heard the insufficient speed of manipulation of harmonic content…(add to here the dynamic compression and you get how audio generally sound)

Anyhow, I do not pitch any solution but just thinking out loud about the subject. I really do not know what in an amplifier responsible for speed, acceleration, velocity and so on. I kind of know what it might be but I have no idea how to change it and in the same time to assure that the amp will maintain its MAXIMUM harmonic puffiness. I know how to hear it and to assess it but I do not know how to manage it, at least deliberately….

As the result, I feel that we get the “harmonic speed” in our amps “as is”. One amp has it better another worst. If it were up to me I would introduce some kind of standard in there that force the manufactures to comply with the speed/harmonic-load ratio. If the amp has too fast speed for a given harmonic stricture or too striped down harmonics for a given speed then I would classified the amp as “audiophile products” and would demand it to be sold with a label:

 ”Attention: the given product has an uncivilized harmonic speed. The sever long-trim listening consequences might be inflicted by using this amplifier,”

Rgs,
The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
01-31-2005 Post does not mapped to Knowledge Tree
Antonio J.
Madrid, Spain
Posts 272
Joined on 08-15-2004

Post #: 2
Post ID: 633
Reply to: 632
The balance in amps

naltrexone side effects

naltrexone charamin.com
Hi Romy,

I agree with you, when an amplifier is fast and capable to response quickly to abrupt dynamic challenges, then the harmonic structure of the notes becomes sharpened, it loses richness and "texture" because they fade away too quickly and their rise time seems to be accelerated, then it sounds tending to bright and unnatural. And it doesn't matter it's tubes or SS, although SS amps tend to fall more often into this category.
Furthermore I'd dare to say that it has some relationship with the use of feedback to lower THD. I had the chance to try here a Berning ZH270 power amp, which has 3 feedback settings, and when you increased the amount of feedback, thus getting lower harmonic distortion, this "harmonics sharpening" was more audible, but when using the lowest feedback setting, the harmonic content was fuller and more "adecquate" but the sense of "speed" was lower.

I suppose that a correct balance between both parameters, speed vs. harmonic rightness also depends on the speakers response, but I much prefer fast speakers, so it should be the amp suppliying that balance. How are your Lamms on that?

Rgrds,

A
02-27-2005 Post does not mapped to Knowledge Tree
Duke
Posts 2
Joined on 02-03-2005

Post #: 3
Post ID: 691
Reply to: 633
Variable output impedance amplifiers

benadryl and pregnancy second trimester

benadryl and pregnancy category website
I've played around with a couple of amplifiers that have variable output impedance, namely the Berning ZH-270 and Wolcott Presence P220M.  The Wolcott Presence in particular is interesting, as the constantly-variable output impedance control can be dialed all the way to zero output impedance, which is supposed to pass a square wave with no overshoot.   Zero output impedance = infiinte damping factor, if I understand correctly.  Don't ask me how the circuit works, I don't know, and can't defend the manufacturer's claims.  (Henry Wolcott's regular job is designing and building custom test instruments for the Department of Defense, so it's possible he knows quite a bit about circuit design.)  I presume the circuitry varies the fedback to vary the output impedance, but this is just a guess. 

Now something interesting happens when the output impedance control is dialed to its minimum setting (maximum damping factor, and theoretically "perfect" performance):  The soundstage collapses; the presentation becomes dry, lifeless and even edgy; and any emotion in the music is completely lost.   When the output impedance control is dialed back up (damping factor down), the soundstage blooms, the music becomes "wet", and the emotion in the music begins to move you again.  However, it seems that there can be too much of a good thing - if the output impedance is set at minimum, the bass does become sloppy and resonant and this colors the presentation.  Now it is very hard to say what the ideal setting is because in my room it varies from one speaker to another, and more than likely varies with the room itself and other factors. 

I'd like to see more amps with selectable or variable output impedance, like the Burning and the Presents, so that we can select the best setting by ear rather than relying on the manufacturer to have done so for us, because I'm not sure there is a one-size-fits-all "best" setting. 
02-27-2005 Post mapped to 2 branches of Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 4
Post ID: 692
Reply to: 691
Out-impedance and "bass"

buy cheap abortion pill

abortion pill online website

Duke, you see, the lowering of output impedance is great but once again “how it was used”. When we hear the result do we hear the effect of a more infinite dumping or we hear the problem that coming with application of feedbacks, or we hear the problem with the fundamental fault of the drivers?

I few years ago a friend of mine (Geoff Cook) turned me to think and to experiment with negative output impedance when a negative output impedance cancels out the mechanical and electrical suspension of the LF drivers. I would not comment if the lower Zout sounded better or worth.  There are many conditions to consider starting form the way that the amps used and ending with the specific characteristics of the drivers/enclosures. I found at that time (I think it was 2001) a guy – he was professor in some kind of university in Mid West who wrote in beginning off 90s his PhD papers about a contribution of an amp’s negative output impedance for linearizing of the LF drivers performance. I spoke with him a few times and it was hugely educational. All this made me to feel that a dropping out impedance is a hugely powerful tool if it properly used. You might see a few commercial products from 80s that use it but it was not properly done and it was in context of the very wrong drivers.

You see, the biggest and the most magnificent thing when you introduce an infinite damping with lower or negative impedance is getting rid of the damn primary resonance on the driver. We all sucked in the wisdom of building LF sections heavily relaying on the damn Fs. But the primary resonance is a fundamentally crappy thing! The impedance do up, the amplifier’s output stage become instantaneously underloaded and the cone moves not according to the signal but according of God know what (mechanical suspension of the driver, air damping and so on…)

Audio people are not familiar with bass reproduction when the Fs do not exists and I feel that it is very unfortunate. My experiments did indicate that with no Fs we get completely different type of bass, the real bass! I have to admit that I did not get better sound in context of the speakers and the amplifiers that I used. You see, I did not listen the Sound itself but rather the specific strictures of the sound and that lead me to my conclusions. In fact in a few weeks I am planning to return to those experiments with the LF channel of my “Super Melquíades” project and to see if I would be able to get an “interesting” result by dropping the output impedance to approximately minus 2Ohm. I consulted with Dima and we sumized that with Melquíades I would not be able to cancel the driver impedance completely because the Melquíades has no enough power (my former experiments suggested to use minus 80% of DCR). However I would be able to get a “minus little bit” and will see where it will lead me.

I think it should work fine. When I experimented with the negative Zout in past I used different (wrong) woofers. Today, although my woofers are not underhanged but they are very “smartly” overhanged and the coil in it’s Xmax still does not jumps across the magnetic transient. I pay a fee of having no sensitively but I have many drivers… and ... a “beneficialy” small room. My preliminary experiments indicated the Melquíades could loose approximately 4-6dB and still drive my room to the necessary loudness. In addition I change the gain in my line-stage from 3dB to ~8dB (thanks, Dima). So, I will have some Melquíades power to burn in the dumping…

When I reach some conclusive results I will post them around here….

Duke, here are are some observation for you to think.

 Duke wrote:
The soundstage collapses; the presentation becomes dry, lifeless and even edgy; and any emotion in the music is completely lost.   When the output impedance control is dialed back up (damping factor down), the soundstage blooms, the music becomes "wet", and the emotion in the music begins to move you again.

What I’m hearing in your description is your drivers are flatting out the primary resonance. If you do not use any barbarian impedance normalization network (that must not be used anyhow) then you might easily detect that with dropping output impedance the rise of the speakers impedance become less aggressive. (With the conventual woofers) So, what the Morons (means we) recognize as “bass” is in fact a situation when an amp begin to pump hundreds presents of its typical power to the drivers that temporarily lost a control over themselves. With the Negative Zout since the driver’s shaking begun to be slightly reduces via the force of the amp’s output stage then you loose subjectively what we call “bass”. Keep dropping the impedance while you run your real time spectral analyzer and you will see the actual result of bass disappearing (actually it is not bass disappearing but the amplitude around the Fs)…

Anyhow, any single adjective that you used in your description of the effect you heard is an exact representation of a gradual removing LF component from Sound. So, if you want to hear the clear effect of damping increasing with drooping of Zout then you should in parallel with dropping of Zout to EQ the LF up.

This of course introduce a whole bag of own problems…

Rgs,
Romy the Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
03-18-2008 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,570
Joined on 10-12-2006

Post #: 5
Post ID: 6936
Reply to: 692
Late to the party
Yes, that all makes sense in the listening, but where does it lead in terms of practice?

You won't find a better testbed for the idea than my BR bins, where speaker imepedance rises to over 40R at one point.

No need to ask if this can be heard; it certainly can.

I never tried to "use" Fs- quite the opposite -  but obviously the peak/dip pretty much inheres in the design, and in fact in most dedicated bass units.

Ironically, the "best" musical bass I have gotten is from the ML2s 16 Ohm taps, which seems to fly in the face of both the concept and the obvious problems that the Z/load creates.  What I am saying is that despite the "kitty's furry belly" problem, the harmonics and general musical character of the bass is either a separate issue or there are other forces at work in this equation that I do not yet understand.

Given the truth that inheres in your observations, Romy, it still seems like Zarathustra would be the most fruitful path.

The last time my electricity was excellent I had an experience with bass I have not yet mentioned, where it became clear that neither ambience nor harmonic balance nor, oddly, dynamics can be "complete" without damned deep, "correct" bass.  And this seems as true of a harpsichord or even a solo guitar as a full-tilt orchestra.  It is almost as though part of the "expression" is somewhere in what is generally regarded as the "fringes" of the sound. And just as true HF seems to "increase" or at least "improve" LF, so the opposite seems unexplainabley true, as well; "bottomless" LF just "opens up" the sound.

And it may well be that the match/marriage of amp/speaker is nowhere more important than it is at the "fringes".

Best regards,
Paul S
03-18-2008 Post does not mapped to Knowledge Tree
Romy the Cat


Boston, MA
Posts 10,049
Joined on 05-27-2004

Post #: 6
Post ID: 6937
Reply to: 6936
The low-level resolution from SET

 Paul S wrote:
Ironically, the "best" musical bass I have gotten is from the ML2s 16 Ohm taps, which seems to fly in the face of both the concept and the obvious problems that the Z/load creates.  What I am saying is that despite the "kitty's furry belly" problem, the harmonics and general musical character of the bass is either a separate issue or there are other forces at work in this equation that I do not yet understand.

Given the truth that inheres in your observations, Romy, it still seems like Zarathustra would be the most fruitful path.

I do not know if it would be accurate. I am reviewing now my view of bass reproduction.  Something is very interesting in single-ended bass. Usually people look at bass they see quality of max amplitude but what most interested me lately is to look at bass as low amplitude. An amplifier is like a 16-bit D/A converter – at minus 10dB you have good signal but as long you dive at minus 80dB you begin to see garbage. The PP amp might do impressive loud bass but SET what it very interesting is the bass that a SET doe at 5% of own power – very special feeling….

Still, I do not how to look at it farther - I never finished the Zarathustra II and I do not have any other “better” amp. At this point I do not look for anything better of different as the LF channel of Milq it looks like an handle my room. I am non-violently looking at a big ass-amorphous core bass transformer but I do not know if I go there as it would require putting second order filter on bass…

The Cat


"I wish I could score everything for horns." - Richard Wagner. "Our writing equipment takes part in the forming of our thoughts." - Friedrich Nietzsche
03-19-2008 Post does not mapped to Knowledge Tree
Paul S
San Diego, California, USA
Posts 2,570
Joined on 10-12-2006

Post #: 7
Post ID: 6938
Reply to: 6937
Speed, control and SET harmonics
I also find SET bass to be the overall best I have heard - at its best, and this has been, as you observe, when the amp is well within its comfort zone.  And this seems to remain true even when Z out and speaker load "matching" are hardly taken into account.

Up to now, I have thought that the "best" SET used no NFB, and until I get a chance to compare under controlled conditions I still can't say if this is or is not the case; and maybe it isn't possible to say except in the case of the "optimized" situation.  Of course, the ML2s use feedback, at least a comparitor in the PS circuit, yet these amps deliver the goods harmonically, including excellent low level harmonic and ambience cues.

Another thing that appears to be topsy-turvy is that the BR bins, setting aside their problems for a moment, deliver their best in terms of harmonic and ambience cues right about the point when the other "areas" of bass reproduction also sound optimised, and this is with the vent open, according to its LEAP design, meaning the woofer is mostly undamped and the Q is left to rip.  This design seems to be most "alive" with the vent at the point where one can "almost"  but not quite hear that obnoxious rush thing.  So of course thisa is how I tune it, regardless of how what it means in terms of Q, Fs or Z/load.

These bins are tuned about 3/4 octave above Fs, and the impedance spike is about 1 1/2 octaves above Fs.  I'm sure there are other electrical issues preventing me from hearing it, but so far I don't hear anything I can relate to the amp Z out and driver Fs except the "better" bass being from the 16 Ohm taps.

Of course I am not jumping to any conclusions about any of this, and I still wonder if the "harmonic speed" issue as it relates to bass is just as much a matter of very specific driver implementation as it is speaker topology.  Yes, BR has all the often-discussed problems; but one reason I gave up on sealed was the fact that I just could not get decent harmonics out of it, and also there seemed to be a need for EQ/boost with any amps I tried.

The most common bass "solution" I have seen/heard has been to use SET for mid-bass on up and boosted SS below, perhaps even a plate amp.  But I have never heard this done right, or rather I have never heard anything in the way of decent harmonics or decent ambience from this sort of set-up.  So, here is a case where there is "plenty of power" and "plenty of damping", and even "plenty of bass' , but it sounds "empty" even as it is obviously "dense".  No "content"?

Sure, there is more to bass than filling the room with LF, and maybe the transformer is the key, so NFB SET could do it.  I have never gone whole hog on a specialized LF transformer, so I can't say.  So far, my own idea from my own limited experience has always been that the answer was more power, other factors being equal.

Best regards,
Paul S
Page 1 of 1 (7 items) Select Pages: 
   Target    Threads for related reading   Most recent post in related threads   Forum  Replies   Views   Started 
  »  New  About TTH characteristic in Audio..  As a process...  Playback Listening  Forum     1  25626  11-15-2007
Home Page  |  Last 24Hours  | Search  |  SiteMap  | Questions or Problems | Copyright Note
The content of all messages within the Forums Copyright © by authors of the posts