|
Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
|
|
|
Got the ultra low DCR toroids coil and pit them in use. Yes, it was very right move and they a bit trimmed the midbass tail. Playing with inductance and listening how the midbass decays (measurements are worthless in this case) I ended up with 4.8mH ...
|
This week I will be trying to address why the Milq midbass is clipping. This is very interesting one. Currently the Melquiades LF channel uses an output transformer 700R to 5R or 11.83 to 1. I thought before that I have much lower ratio, like 5:1 bu...
|
Romy,I actually had one of those horns, as I wrote in the first post. Edgar 80hz straight horn. I sold it long ago because I did not like the sound, no matter what amps I tried it with. The problem was, to me it sounded muddy, no matter what I tried,...
|
This thread is old, but I thought that I would add my 2c....
I use a Karlson with EV15L speakers. This fills the gap from 60 to 500 hz nicely. The Karlson is a 6th-order bandpass box, and while it has some resonances above the 2 o...
|
Hi Roberts, Romy and others,Before this thread vanishes in undeserved obscurity, I have a question or two for you. I understand that the issue is a complex one and should be addressed with more care and paying attention to detail than I am do...
|
[quote user="Romy the Cat"]I do feel that a playback sound has to be built first...The way how I trained myself is to disconnect channels. While I was making Macondo, installing it, moving it and experimenting with it I was frequently disconnecting c...
|
Decays may not be only from your horn inside mouth ...Try to treat your back chamber(whole area of were your driver radiating sound ) with highly dense materials and use absorbers too.Use acoustic dampers like rubber where your horn mouth contacting ...
|
Today is an anniversary as my midbass channel was completed, installed and finished. The horns still did not collapse my house. Below is the picture before and is it is today.
The Cat...
|
[quote user="Kcct82"]Thanks Romy, your comment above cleared some of the questions I had regarding 50/60hz midbass horns.
I found some info on the driver after digging through Japanese sites. I don't know if these info will help interpret with...
|
The guy is real good, and i would like to find some of his stuff on CD. Can you find his music in the states? Can you post some pictures of basement? PREACHING HORN RELIGION MSAUDIO...
|
I was thinking and fantasizing about finishing of my midbass horn. My first idea was to paint it internally with the same color as my cathedral room. Perhaps a lighter grade of paint in the end as the horn goes dark. As the only mouths of the horns w...
|
As some of your might know I am not huge in Mahler. It is not that I hate Mahler and his music but I do not like how Mahler music is customary being played. They play Mahler like it is some kind of scared porcupine, sticking out his needles; I do not...
|
The folks from lencoheaven.com have a thread where they as most of the people online stupidly damp pictures of different horns, supplementing them with howls “gorgeous” and “beautiful.” One of the installations picked my attention:
http:...
|
I would like to suggest an alternative factor or explanation to your recent ULF/midbass findings.When you were chronicling the design and implementation of your midbass horns I was curious as to the effect of the very close placement of the two h...
|
Despite the fact the I lost the quality of the lower knee of my midbass horn (I guess the primary resonance went all the way down) I keep trying to catch the right termination of midbass low pass filter. I bought those expensive 20H coils and added ...
|
OK, this morning I tuned the playback and did some listing, trying to understand what was the problem. Sound was not just bad but it was very strange, it was almost as a mechanical replica of sound. I took my phase meter trying to set horns in ph...
|
How lucky was I that I bough that digital crossover! I am think now how can I search for my crossover slope and find that this digital toy would make it very so much easy. My major concern is to make sure that some frequency anomalies that I have fo...
|
I changed the new flash at my site to “Ok, the midbass horn project is successfully over. Over 3 months, over 400 posts, over 180 pictures… all publicly available…” The project started physically on July 16, 2010, ended on October 28, 2010. The prepa...
|
One of the challenges I see for my midbass horns is to minimize hf output. The goal is to operate the horn in a bandwidth where it can cross to the higher horns, and have each horn function in their best sounding manner. My drivers are Altec 515-16...
|
The back section is made not in the scale and not in right proportion. The front piece is the correct one....
|
[quote user="Romy the Cat"]I was thinking about the throat of my hypothetic midbass horn. This is complex, controversial and it has pretty much no answer, at least in the formeat I ask it. I will share my thoughts with you.
Let pretend that I...
|
Romy I see were you are going With this horn worship for midbass. It is the correct thing to do "But you still will not be happy with the outcome because it does no go low enough. You will not be happy with 60hz. Then you will need something that ...
|
OK, the preceding thread what I research the subject of Midbass Horns and Real Estate have finished with great success.
http://www.goodsoundclub.com/Forums/ShowPost.aspx?PostID=11190
I found and got a house that I like very much ...
|
I still do not know if it will be doing at in my attic and I already bitch that I do not like something. Well, it is me… Considering the cost, objectives and the level how my midbass horn will be implemented (if they will) one could feel that it will...
|
Hi miab, my room is approx. 6x5x4m, so although quite small by North American standards (not UK!), the ceiling is higher than that of most modern houses. This seems to play a big part in the LF performance of any speakers in this room. I currently ha...
|
[quote user="skushino"]My desire is to use a pair of bass horns for each channel, both vertically oriented, one each exhausting to the floor and the ceiling. I have an idea that spatial presentation will gain a big boost with both up and down firing...
|
A few months back a audio guy visited me and after a listening session I asked him if he can report any problems with sound. He reported that he hears a slightly more prolonging decay at upper bass then what he suspect to be. I knew about this effect...
|
By “midbass horn” I’m talking about a horn with about a flare frequency of about 60 Hz, to use with Fane 8” drivers, to start with.
(Was planning to use this horn from wherever it sounded best, trying for around 80 Hz to ~35...
|
romy, you said, you would place a 60hz midbass on the side, is this still your opinion? of, course i found no other solution in my small room. will do it the way you suggested, 60-300, 300-1000(thinking about gpa 288h(s2 is too expensive for me), may...
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
Last 24-hours posts: |
3 |
|
|
|
Total human visitors: |
42,949,240 |
|
|
|
|
|
|